HP L25500 manual Handle the ink system

Page 55

2.Remove the orange protective caps by pulling them down.

3.The printhead is designed to prevent you from accidentally inserting it into the wrong slot. Check that the colored label on the printhead matches the colored label of the carriage slot into which the printhead is to be inserted.

4.Insert the new printhead into its correct slot in the carriage.

CAUTION: Insert the printhead slowly and vertically, straight down. It can be damaged if you insert it too quickly, or at an angle, or if you rotate it as you insert it.

5.Push down as indicated by the arrow.

CAUTION: You might feel some resistance when installing the new printhead, so you need to press it down firmly but smoothly. You should hear a beep and see confirmation on the front-panel display that the printhead has been inserted. If you have difficulty, See the Maintenance and troubleshooting guide.

Handle the ink system

ENWW	Work with ink system components 51

Image 55

Contents HP Designjet L25500 Printer series Trademarks Legal noticesTable of contents Printer specifications AccessoriesElectrical shock hazard Safety precautionsGeneral safety guidelines IntroductionFire hazard Heat hazardMechanical hazard Ink handling Heavy substrate hazardLabel Explanation Printers main featuresFront view 60-in printer Printers main componentsRear view 60-in printer Front panel Take-up reel motorEmbedded Web Server Main tab Setup tabSupport tab Connection type Speed Maximum cable length Other factors Connectivity and software instructionsConnection method Connect to a networkPrinter setup options Basic setup optionsTurn the printer on and off Change the language of the front panel Restart the printerEmbedded Web Server setup options Change the language of the Embedded Web Server Overview Handle the substrateUse substrate Supported substrate families Load a roll onto the spindleSubstrate family Substrate types Load a roll onto the spindle Handle the substrate Load a roll into the printer Substrate Change loaded substrate Handle the substrate Exceptional procedure roll detached from spindle Normal procedure roll attached to spindleUnload a roll from the printer Load a roll onto the take-up reel Use the take-up reelHandle the substrate Handle the substrate Handle the substrate Enww Handle the substrate Unload a roll from the take-up reel Handle the substrate Store the substrate View information about the substrateAdd a new substrate type Download substrate presetsSummary Substrate family Description Select printer settings and color profileSubstrate family Paper-Solvent Setting Description If too low If too highHP Photorealistic 100 Substrate at the beginning Key Select the number of passesVinyl Check the ink quantity Coalescence, grain Color profiles Color calibrationFaster printing Ink system components Handle the ink systemInk cartridges Printheads Printhead cleaning container Printhead cleaning cartridgeInk funnel Work with ink system components Ink system tipsReplace an ink cartridge Remove an ink cartridge Work with ink system components Insert an ink cartridge Replace a printhead Remove a printhead Handle the ink system Insert a printhead Handle the ink system Handle the ink system Remove the printhead cleaning cartridge Replace the printhead cleaning kitHandle the ink system Insert the printhead cleaning cartridge Replace the ink funnel Handle the ink system Cartridge Order ink suppliesPrinthead Printhead cleanerPrinter states Print optionsChange margins Request the printers internal prints Order accessories AccessoriesName Functional specifications Printer specificationsMinimum Maximum Ecological specifications Physical specificationsMemory specifications Power specificationsAcoustic specifications Environmental specificationsAirflow GlossaryLED Margins IndexOrder Enww