HP L25500 manual Use the take-up reel, Load a roll onto the take-up reel

Page 27

3.Pull out the substrate from the front of the printer.

4.Remove the empty spindle from the printer, pulling out the end on the right side of the printer first. Do not insert your fingers into the spindle supports during the removal process.

5.Lower the substrate-adjustment lever.

6.If the front panel shows a warning message, press the OK button to clear it.

NOTE: If the end of the roll has disappeared inside the printer, use the Move substrate button on the front panel to move it forward.

Use the take-up reel

The take-up reel must be enabled and operated from the front panel. When the take-up reel is enabled, the “Take-up reel enabled” message appears on the Substrate tab on the front panel. If the take-up reel is not enabled and you would like to enable it, select the icon and then select Take-up reel >

Enable take-up reel.

Follow these guidelines when taping rolls to the take-up reel spindle core:

●Make sure that the substrate is straight when it is attached to the spindle core. Otherwise it skews as it winds onto the core.

●The spindle core on the take-up reel must be the same width as the substrate that you are using.

●Check that neither side of the spindle core has end caps, and make sure the spindle core is pushed firmly into both spindle guides.

NOTE: If you want to load the take-up reel during printing, familiarize yourself with the procedural steps. Loading the take-up reel during printing requires you to complete the procedure while the printer is feeding and printing substrate. Loading the take-up reel during printing saves approximately 1 m (3 feet) of substrate.

Load a roll onto the take-up reel

1.On the printer's front panel, select the icon, and then select Substrate load > Load take-up reel.

Handle the substrate

ENWW	Use the take-up reel 23

Image 27

Contents HP Designjet L25500 Printer series Trademarks Legal noticesTable of contents Printer specifications AccessoriesElectrical shock hazard Safety precautionsGeneral safety guidelines IntroductionHeat hazard Fire hazardMechanical hazard Ink handling Heavy substrate hazardLabel Explanation Printers main featuresFront view 60-in printer Printers main componentsRear view 60-in printer Front panel Take-up reel motorEmbedded Web Server Setup tab Main tabSupport tab Connection type Speed Maximum cable length Other factors Connectivity and software instructionsConnection method Connect to a networkBasic setup options Printer setup optionsTurn the printer on and off Change the language of the front panel Restart the printerEmbedded Web Server setup options Change the language of the Embedded Web Server Handle the substrate OverviewUse substrate Load a roll onto the spindle Supported substrate familiesSubstrate family Substrate types Load a roll onto the spindle Handle the substrate Load a roll into the printer Substrate Change loaded substrate Handle the substrate Normal procedure roll attached to spindle Exceptional procedure roll detached from spindleUnload a roll from the printer Load a roll onto the take-up reel Use the take-up reelHandle the substrate Handle the substrate Handle the substrate Enww Handle the substrate Unload a roll from the take-up reel Handle the substrate Store the substrate View information about the substrateDownload substrate presets Add a new substrate typeSummary Select printer settings and color profile Substrate family DescriptionSubstrate family Setting Description If too low If too high Paper-SolventHP Photorealistic 100 Substrate at the beginning Select the number of passes KeyVinyl Check the ink quantity Coalescence, grain Color calibration Color profilesFaster printing Handle the ink system Ink system componentsInk cartridges Printheads Printhead cleaning cartridge Printhead cleaning containerInk funnel Ink system tips Work with ink system componentsReplace an ink cartridge Remove an ink cartridge Work with ink system components Insert an ink cartridge Replace a printhead Remove a printhead Handle the ink system Insert a printhead Handle the ink system Handle the ink system Remove the printhead cleaning cartridge Replace the printhead cleaning kitHandle the ink system Insert the printhead cleaning cartridge Replace the ink funnel Handle the ink system Cartridge Order ink suppliesPrinthead Printhead cleanerPrint options Printer statesChange margins Request the printers internal prints Accessories Order accessoriesName Printer specifications Functional specificationsMinimum Maximum Ecological specifications Physical specificationsMemory specifications Power specificationsAcoustic specifications Environmental specificationsAirflow GlossaryLED Index MarginsOrder Enww