HP L25500 manual Printers main features, Label Explanation

Page 8

Introduction

Label	Explanation

	See installation instructions before connecting to the supply.
	Ensure that the input voltage is within the printer's rated voltage
	range. The printer requires two dedicated lines, each protected
	by a branch circuit breaker according to the rating of the wall
	socket outlet. Use only earthed mains outlets and the power
	cords supplied by HP with the printer.

	Risk of trapped hands. Do not push the roll while loading. Lift
	the loading table to ease the spindle into the printer.

Risk of trapped fingers. Do not touch spindle gears while moving.

Do not put objects on top of the printer. Do not cover the fans.

You are recommended to wear gloves when handling ink cartridges, printhead cleaning cartridges and the printhead cleaning container.

The printer's main features

Your printer is a color inkjet printer designed for printing high-quality images on flexible substrates from 23 in (584 mm) to 42 or 60 in (1.07 or 1.52 m) wide, depending on which printer model you have. Some major features of the printer are shown below:

●Printing speeds in draft mode of up to 250 ft²/h (24 m²/h) with the 60-in printer, 220 ft²/h (21 m²/h) with the 42-in printer.

●Environmentally friendly, odorless, aqueous latex inks in six colors

●No special ventilation required, no hazardous waste

●775 ml ink cartridges

●Print on a wide range of substrates—including most low-cost, uncoated, solvent-compatible substrates

●A range of HP recyclable substrates is available

●Durable prints with outdoor display permanence up to three years unlaminated, five years laminated

4 Chapter 1 Introduction

ENWW

Image 8

Contents HP Designjet L25500 Printer series Legal notices TrademarksTable of contents Accessories Printer specificationsSafety precautions General safety guidelinesIntroduction Electrical shock hazardMechanical hazard Heat hazardFire hazard Heavy substrate hazard Ink handlingPrinters main features Label ExplanationPrinters main components Front view 60-in printerRear view 60-in printer Take-up reel motor Front panelEmbedded Web Server Support tab Setup tabMain tab Connectivity and software instructions Connection methodConnect to a network Connection type Speed Maximum cable length Other factorsTurn the printer on and off Basic setup optionsPrinter setup options Restart the printer Change the language of the front panelEmbedded Web Server setup options Change the language of the Embedded Web Server Use substrate Handle the substrateOverview Substrate family Substrate types Load a roll onto the spindleSupported substrate families Load a roll onto the spindle Handle the substrate Load a roll into the printer Substrate Change loaded substrate Handle the substrate Unload a roll from the printer Normal procedure roll attached to spindleExceptional procedure roll detached from spindle Use the take-up reel Load a roll onto the take-up reelHandle the substrate Handle the substrate Handle the substrate Enww Handle the substrate Unload a roll from the take-up reel Handle the substrate View information about the substrate Store the substrateSummary Download substrate presetsAdd a new substrate type Substrate family Select printer settings and color profileSubstrate family Description HP Photorealistic 100 Setting Description If too low If too highPaper-Solvent Substrate at the beginning Vinyl Select the number of passesKey Check the ink quantity Coalescence, grain Faster printing Color calibrationColor profiles Ink cartridges Handle the ink systemInk system components Printheads Ink funnel Printhead cleaning cartridgePrinthead cleaning container Replace an ink cartridge Ink system tipsWork with ink system components Remove an ink cartridge Work with ink system components Insert an ink cartridge Replace a printhead Remove a printhead Handle the ink system Insert a printhead Handle the ink system Handle the ink system Replace the printhead cleaning kit Remove the printhead cleaning cartridgeHandle the ink system Insert the printhead cleaning cartridge Replace the ink funnel Handle the ink system Order ink supplies CartridgePrinthead cleaner PrintheadChange margins Print optionsPrinter states Request the printers internal prints Name AccessoriesOrder accessories Minimum Maximum Printer specificationsFunctional specifications Physical specifications Memory specificationsPower specifications Ecological specificationsEnvironmental specifications Acoustic specificationsGlossary AirflowLED Order IndexMargins Enww