
9.Put the blue stop on to the upper end of the spindle, and push it towards the end of the roll.
10.Slide the
11.Lift the loading table to ease the spindle into the printer.
CAUTION: To avoid trapping your fingers, do not push the roll with your hands.
If you regularly use different substrates, you can change rolls more quickly if you
Load a roll into the printer
To start this procedure, you need to have a roll loaded on the spindle. See Load a roll onto the spindle on page 16.
The normal minimum substrate width is 23 inches (584 mm). To load substrates down to a minimum width of 10 inches (254 mm), go to the front panel and select the icon, then select Substrate handling options > Enable narrow substrate. With this option, print quality is not guaranteed.
Handle the substrate
ENWW | Load a roll into the printer 19 |