HP RP5 5810 manual

7.Rotate up the internal drive bay housing to access the memory module sockets on the system board.

Figure 2-9Rotating the Drive Cage Up

8.Open both latches of the memory module socket (1), and insert the memory module into the socket (2).

Figure 2-10Installing a DIMM

NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket.

Populate the black DIMM sockets before the white DIMM sockets.

For maximum performance, populate the sockets so that the memory capacity is spread as equally as possible between Channel A and Channel B. Refer to Populating DIMM Sockets on page 13 for more information.

Installing Additional Memory 15