HP RP5 5810 manual

13.Connect the power cable (1) and data cable (2) to the back of the hard drive.

NOTE: The data cable for the primary hard drive must be connected to the dark blue connector labeled SATA0 on the system board to avoid any hard drive performance problems.

Figure 2-68Connecting the Hard Drive Power and Data Cables

NOTE: Refer to System Board Drive Connections on page 41 for an illustration of the system board drive connectors.

14.Rotate the drive cage for internal drives and the power supply down to their normal positions.

15.Replace the access panel.

16.If the computer was on a stand, replace the stand.

17.Reconnect the power cord and any external devices, then turn on the computer.

18.Lock any security devices that were disengaged when the access panel was removed.

56 Chapter 2 Hardware Upgrades