HP RP5 5810 manual

Page 36

9.Before installing the expansion card, remove the expansion slot cover in the lower slot. The Powered Serial Port expansion card must be installed in the lower slot.

Figure 2-28Removing an Expansion Slot Cover

10.Install the Powered Serial Port expansion card into the bottom socket on the riser card. Move the card toward the rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of the chassis (1). Press the card straight down into the expansion socket on the riser card (2).

NOTE: The Powered Serial Port expansion card must be installed in the bottom socket on the riser card. The bottom socket is designed specifically for that card. DO NOT attempt to install any other card in the bottom socket.

Figure 2-29Installing the Powered Serial Port Expansion Card in the Riser Card

30 Chapter 2 Hardware Upgrades

Image 36

Contents Hardware Reference Guide Product Notice About This Book Iv About This Book Table of contents Preventing Electrostatic Damage Grounding Methods Product Features Standard Configuration FeaturesDrive configuration may vary by model Front Panel ComponentsRear Panel Components 2Rear Panel ComponentsChanging from Desktop to Tower Configuration Installing the Optional Port Cover Serial Number Location 7Cable RoutingHardware Upgrades Removing the Computer Access Panel Replacing the Computer Access PanelRemoving the Front Bezel Installing an Optical Drive Bezel 5Installing the Optical Drive Bezel Hardware UpgradesRemoving a Bezel Blank Replacing the Front BezelInstalling Additional Memory DIMMsDDR3-SDRAM DIMMs Populating Dimm Sockets 1DIMM Socket LocationsInstalling DIMMs Page Page Installing a Half-Height Expansion Card 2System Board Expansion Slot LocationsInstalling a 12-Volt Powered USB Expansion Card 1324-volt and 12-volt Powered USB ConnectorsPage Page Page Page Page Installing a Second DisplayPort Expansion Card Page Page Installing a Full-Height Expansion Card 4Riser Card ConfigurationsInstalling a Powered Serial Port Expansion Card 25Powered Serial PortsPage Page Close the expansion card retention latch Configuring Powered Serial Ports Replacing the Riser CardPage 35Removing the Lower Expansion Slot Cover Hardware Upgrades 37Removing the Riser Card Bracket Replacing the Riser Card 39Installing the Riser Card Hardware Upgrades Page Close the expansion card retention latch Installing and Removing Drives Drive Positions45Extra Guide Screw Locations System Board Drive Connections 8System Board Drive ConnectionsRemoving an Optical Drive from the 5.25-inch Drive Bay Page Installing an Optical Drive into the 5.25-inch Drive Bay 50Removing the 5.25-inch DrivePage Page Page Removing a Secondary Hard Drive from the 3.5-inch Drive Bay Page 60Installing a Secondary Hard Drive Hardware Upgrades Page 63Raising the Power Supply Hardware Upgrades Page Page 67Installing the Hard Drive Installing and Removing Drives Page Replacing the Battery Type69Removing and Replacing a Coin Cell Battery Type Installing a Security Lock HP Keyed Cable LockPadlock HP Business PC Security Lock Page Page Page Front Bezel Security Page Optional Integration Tray and Accessories Page Preventing Electrostatic Damage Grounding MethodsComputer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex USB