HP rp5000 Base Model Point of Sale, rp5000 Point of Sale manual Removing the Expansion Card Cage

Page 19

Hardware Upgrades

4.Disconnect all cables attached to the expansion cards.

5.Grasp the expansion card cage by the green labels and pull it straight up to remove it from the chassis.

Removing the Expansion Card Cage

To replace the expansion card cage, reverse the above procedure.

✎Ensure that the riser card seats properly into the PCI connector on the system board when reinstalling the expansion card cage.

Hardware Reference Guide

www.hp.com

2-9

Image 19

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Standard Configuration Features Product FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsWindows Logo Key Functions Windows Logo KeyRemoving the Serial Port Cap Serial Number and Product Number Location Serviceability Features Hardware UpgradesRemoving the Computer Access Panel and Front Bezel Removing the Front Bezel DIMMs Installing Additional MemoryDDR1-SDRAM DIMMs Installing DDR1-SDRAM DIMMs Locate the memory module sockets Installing a Dimm Removing the Expansion Card Cage Removing the Expansion Card Cage Installing an Expansion Card Install the expansion card Removing the HP USB+Power Card To replace the USB+Power card, reverse the above procedure Installing Additional Drives Desktop Drive Positions Locating Drive PositionsRemoving an Optical Drive or Diskette Drive Removing the Optical Drive or Diskette Drive Installing a 5.25-inch Bezel Blank Installing an Optional Optical Drive Installing Guide Screws in the Optical Drive Installing the Optical Drive Connecting the Power and Flat Ribbon Cable Removing and Replacing the Hard Drive Upgrading the Hard DriveRemoving the Hard Drive Installing a Drive into the 3.5-inch Drive Bay Guide Screw Locations Removing the Diskette Drive Bezel Installing a Hard Drive into the 3.5-inch Drive Bay Replacing the 3.5-inch Bezel Page HP Point of Sale System rp5000 SpecificationsPower Supply 115 230 Powered Serial Port Configuration Serial Port Jumper Positions Serial Port Jumper Locations Page Using the Cable-Select Feature with Ultra ATA Devices Hard Drive Installation GuidelinesGuidelines for Installing Ultra ATA Devices Conductor Ultra ATA Cable Battery Replacement Type Type Replacing a Coin Cell Battery Type Security Lock Provisions Installing a Security LockInstalling a Padlock Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Electrostatic Discharge Routine Computer Care Routine Computer Care Shipping PreparationOperation Optical Drive PrecautionsCleaning SafetyShipping Preparation Page Index Index Index-3

Related manuals

Manual 60 pages 59.53 Kb