HP rp5000 Point of Sale, rp5000 Base Model Point of Sale manual Installing an Expansion Card

Page 20

Hardware Upgrades

Installing an Expansion Card

The computer has two PCI expansion slots. Each slot can accommodate an expansion card up to 6.875 inches (17.46 cm) in length. To install an expansion card:

1.Turn off the computer properly through the operating system, then turn off any external devices.

2.Disconnect the power cord from the power outlet and disconnect any external devices.

3.Remove the computer access panel (see “Removing the Computer Access Panel and Front Bezel” in this chapter).

4.Remove the expansion card cage and identify the slot into which you want to insert the expansion card (see “Removing the Expansion Card Cage” in this chapter).

5.Release the slot cover retention latch 1 that secures the PCI slot covers by rotating the latch outward.

6.Remove the slot cover by sliding it out 2.

Removing the Expansion Slot Cover

2-10

www.hp.com

Hardware Reference Guide

Image 20

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsWindows Logo Key Windows Logo Key FunctionsRemoving the Serial Port Cap Serial Number and Product Number Location Hardware Upgrades Serviceability FeaturesRemoving the Computer Access Panel and Front Bezel Removing the Front Bezel DDR1-SDRAM DIMMs Installing Additional MemoryDIMMs Installing DDR1-SDRAM DIMMs Locate the memory module sockets Installing a Dimm Removing the Expansion Card Cage Removing the Expansion Card Cage Installing an Expansion Card Install the expansion card Removing the HP USB+Power Card To replace the USB+Power card, reverse the above procedure Installing Additional Drives Locating Drive Positions Desktop Drive PositionsRemoving an Optical Drive or Diskette Drive Removing the Optical Drive or Diskette Drive Installing a 5.25-inch Bezel Blank Installing an Optional Optical Drive Installing Guide Screws in the Optical Drive Installing the Optical Drive Connecting the Power and Flat Ribbon Cable Upgrading the Hard Drive Removing and Replacing the Hard DriveRemoving the Hard Drive Installing a Drive into the 3.5-inch Drive Bay Guide Screw Locations Removing the Diskette Drive Bezel Installing a Hard Drive into the 3.5-inch Drive Bay Replacing the 3.5-inch Bezel Page Specifications HP Point of Sale System rp5000Power Supply 115 230 Powered Serial Port Configuration Serial Port Jumper Positions Serial Port Jumper Locations Page Guidelines for Installing Ultra ATA Devices Hard Drive Installation GuidelinesUsing the Cable-Select Feature with Ultra ATA Devices Conductor Ultra ATA Cable Battery Replacement Type Type Replacing a Coin Cell Battery Type Installing a Security Lock Security Lock ProvisionsInstalling a Padlock Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Electrostatic Discharge Routine Computer Care Shipping Preparation Routine Computer CareOptical Drive Precautions CleaningSafety OperationShipping Preparation Page Index Index Index-3

Related manuals

Manual 60 pages 59.53 Kb