Hardware Upgrades
6.Replace with the appropriate bezel by pushing the bezel into place.
ÄCAUTION: For proper air circulation to cool internal components during operation, you must install a 3.5-inch bezel. The type of bezel you need will depend on the type of device you are installing. If you are installing a diskette drive, you must install a diskette drive bezel. If you are installing a hard drive, you must install a bezel blank as shown in the illustration below. If you are installing a 3.5-inch device other than a diskette drive or hard drive, you must install the 3.5-inch device bezel. Contact an authorized HP reseller or service provider to order the appropriate bezel when reconfiguring the computer.
Replacing the 3.5-inch Bezel
7.Connect the power and data cables.
8.Replace the front bezel and computer access panel.
✎If you have installed a hard drive that is not automatically recognized by the computer, see Appendix C, “Hard Drive Installation Guidelines.”
Hardware Reference Guide | www.hp.com | 2-29 |
