HP rp5000 Base Model Point of Sale manual Removing the Optical Drive or Diskette Drive

Page 27

Hardware Upgrades

7.Push the drive release latch 1 toward the rear of the chassis and hold.

8.Slide the drive 2 toward the front of the drive cage, then lift the drive out of the computer.

Removing the Optical Drive or Diskette Drive

To replace the drive, reverse the removal procedures.

When replacing the drive, transfer the four screws from the old drive to the new one. The screws take the place of drive rails.

ÄCAUTION: If you do not replace the optical drive, you must install a 5.25-inch bezel blank for proper air circulation to cool internal components during operation. Contact an authorized HP reseller or service provider to order the appropriate bezel when reconfiguring the computer.

Hardware Reference Guide

www.hp.com

2-17

Image 27
Contents Hardware Reference Guide Hardware Reference Guide Contents Index Standard Configuration Features Product FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsWindows Logo Key Functions Windows Logo KeyRemoving the Serial Port Cap Serial Number and Product Number Location Serviceability Features Hardware UpgradesRemoving the Computer Access Panel and Front Bezel Removing the Front Bezel Installing Additional Memory DIMMsDDR1-SDRAM DIMMs Installing DDR1-SDRAM DIMMs Locate the memory module sockets Installing a Dimm Removing the Expansion Card Cage Removing the Expansion Card Cage Installing an Expansion Card Install the expansion card Removing the HP USB+Power Card To replace the USB+Power card, reverse the above procedure Installing Additional Drives Desktop Drive Positions Locating Drive PositionsRemoving an Optical Drive or Diskette Drive Removing the Optical Drive or Diskette Drive Installing a 5.25-inch Bezel Blank Installing an Optional Optical Drive Installing Guide Screws in the Optical Drive Installing the Optical Drive Connecting the Power and Flat Ribbon Cable Removing and Replacing the Hard Drive Upgrading the Hard DriveRemoving the Hard Drive Installing a Drive into the 3.5-inch Drive Bay Guide Screw Locations Removing the Diskette Drive Bezel Installing a Hard Drive into the 3.5-inch Drive Bay Replacing the 3.5-inch Bezel Page HP Point of Sale System rp5000 SpecificationsPower Supply 115 230 Powered Serial Port Configuration Serial Port Jumper Positions Serial Port Jumper Locations Page Hard Drive Installation Guidelines Using the Cable-Select Feature with Ultra ATA DevicesGuidelines for Installing Ultra ATA Devices Conductor Ultra ATA Cable Battery Replacement Type Type Replacing a Coin Cell Battery Type Security Lock Provisions Installing a Security LockInstalling a Padlock Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Electrostatic Discharge Routine Computer Care Routine Computer Care Shipping PreparationOperation Optical Drive PrecautionsCleaning SafetyShipping Preparation Page Index Index Index-3
Related manuals
Manual 60 pages 59.53 Kb