HP rp5000 Point of Sale, rp5000 Base Model Point of Sale manual Replacing a Coin Cell Battery Type

Page 52

Battery Replacement

c.To insert the new battery, slide one edge of the replacement battery under the holder’s lip with the positive side up. Push the other edge down until the clamp snaps over the other edge of the battery.

Replacing a Coin Cell Battery (Type 2)

✎After the battery has been replaced, use the following steps to complete this procedure.

4.Replace the computer access panel.

5.Plug in the computer and turn on power to the computer.

6.Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to the Computer Setup (F10) Utility Guide on the Documentation CD.

D-4

www.hp.com

Hardware Reference Guide

Image 52

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsWindows Logo Key Windows Logo Key FunctionsRemoving the Serial Port Cap Serial Number and Product Number Location Hardware Upgrades Serviceability FeaturesRemoving the Computer Access Panel and Front Bezel Removing the Front Bezel DIMMs Installing Additional MemoryDDR1-SDRAM DIMMs Installing DDR1-SDRAM DIMMs Locate the memory module sockets Installing a Dimm Removing the Expansion Card Cage Removing the Expansion Card Cage Installing an Expansion Card Install the expansion card Removing the HP USB+Power Card To replace the USB+Power card, reverse the above procedure Installing Additional Drives Locating Drive Positions Desktop Drive PositionsRemoving an Optical Drive or Diskette Drive Removing the Optical Drive or Diskette Drive Installing a 5.25-inch Bezel Blank Installing an Optional Optical Drive Installing Guide Screws in the Optical Drive Installing the Optical Drive Connecting the Power and Flat Ribbon Cable Upgrading the Hard Drive Removing and Replacing the Hard DriveRemoving the Hard Drive Installing a Drive into the 3.5-inch Drive Bay Guide Screw Locations Removing the Diskette Drive Bezel Installing a Hard Drive into the 3.5-inch Drive Bay Replacing the 3.5-inch Bezel Page Specifications HP Point of Sale System rp5000Power Supply 115 230 Powered Serial Port Configuration Serial Port Jumper Positions Serial Port Jumper Locations Page Using the Cable-Select Feature with Ultra ATA Devices Hard Drive Installation GuidelinesGuidelines for Installing Ultra ATA Devices Conductor Ultra ATA Cable Battery Replacement Type Type Replacing a Coin Cell Battery Type Installing a Security Lock Security Lock ProvisionsInstalling a Padlock Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Electrostatic Discharge Routine Computer Care Shipping Preparation Routine Computer CareOptical Drive Precautions CleaningSafety OperationShipping Preparation Page Index Index Index-3

Related manuals

Manual 60 pages 59.53 Kb