HP P6000 HP array event code formats and descriptions, Event code format, Software component IDs

Page 96

A HP array event code formats and descriptions

This appendix describes how the hexadecimal number for the event code is formed.

Event code format

Controller and controller termination event codes appear as 32–bit hexadecimal numbers (for example, 060f4013). The bits in the event code differ slightly for each controller event type. The bits of a controller event have the following format:

Table 9 HP array controller event code bits

31

24

23

16

15

8

7

1

Software component ID

Event number

Corrective action code

Event information packet type

The bits of a controller termination event have the following format:

Table 10 HP array controller termination event code bits

31

24

23

16

15

8

.....7

6

5

4

........0

Software

Event number

Corrective action

Coupled crash

Dump/restart

Parameter count

component ID

 

 

code

 

control code

control code

 

 

The following table provides the interpretation of each bit.

Table 11 HP array event code bit interpretation

Bit Interpretation

24:31 The software component ID (SCID or SCWID) identifies the software component that generated the event. The ID ranges from 0x00 to 0xFF.

16:23 The event number is unique for each software component and ranges from 0x00 to 0xFF. Each event code is uniquely identifiable by the combination of the SCID and the event number in bits 16:23.

8:15 The corrective action code is in the range 0x00 to 0xFF.

0:7 (Controller events only) The event information packet type contains a reason for the event and a template that defines the meaning of the data in the packet. It is in the range 0x00 to 0x2F.

7(Controller termination events only) The coupled crash control code specifies whether both controllers are terminating operation.

5:6 (Controller termination events only) The dump/restart control code specifies whether a crash dump is occurring as part of the termination and whether the controllers will restart following termination.

0:4 The termination parameter count specifies the number of entries in the Termination Parameters array that are valid for this termination. If the parameter count is greater than zero, the termination code description in the parse file will describe the meaning of each parameter.

Event code types and descriptions

This section lists the event code types and descriptions.

Software component IDs

Table 12 HP array software component IDs

ID

Description

1

Executive Services

2

Cache Management Component

3

Storage System State Services

96 HP array event code formats and descriptions

Page 95 Page 97
Image 96
Page 95 Page 97
Contents HP P6000 Command View User Guide AbstractSee Internet Protocol support Contents Configuring HP P6000 Command View advanced tasks Troubleshooting HP P6000 Command ViewMaintaining and managing HP P6000/EVA storage systems Monitoring storage system eventsComponents Support and other resources HP array event code formats and descriptionsGlossary 100 Index 103 HP P6000 Command View software suite OverviewPrerequisites HP P6000 Command View features Server-based and array-based managementServer-based configuration Array-based configuration HP Management Integration FrameworkUser interface Storage systems point of view Hardware-SeeHardwareSettings point of view Settings point of viewAccessing HP P6000 Command View Browsing to server-based HP P6000 Command ViewRunning server-based HP P6000 Command View from the desktop Browsing to array-based HP P6000 Command ViewInternet Protocol support IP address formatsManaging security and passwords Server-based HP P6000 Command View security groupsArray-based HP P6000 Command View security groups Password protection for storage systemsEnabling management of a password-protected storage system Password formatsConsiderations Disabling management of a password-protected storage system Setting a password for HP EVA storage systemsDisabling management of a password-protected storage system Single sign-on from HP Systems Insight ManagerManaging security and passwords Licensing HP P6000/EVA storage systems Licenses to use and license keysLicense types Instant-on licensesModel upgrade licensing Model upgrade supportData migration licenses Fcip licensesConfiguring email to receive LTUs Activating an instant-on licenseRetrieving licenses Entering license keysImporting licenses Validating the licenseAdding an LTU Deleting incorrectly entered license keys Displaying temporary license expiration dateProvisioning storage Disk groupsWorking with disk groups Disk types Disk group typesGeneral guidelines Disk group occupancy and occupancy alarm level Disk group capacityNumber of physical disks in a group Redundancy Vraid levels Working with virtual disks in HP P6000 Command View Virtual disksVirtual disks Working with hosts in HP P6000 Command View HostsPresentation Online virtual disk migrationMirrorclone migration Thin provisioningThin provisioned disk Replicating storage HP P6000 Business Copy softwareSnapclones Snapshots Snapshot typesSnapshot guidelines Monitoring snapshot spaceMirrorclones Mirrorclone guidelinesSynchronized mirrorclone guidelines Fractured mirrorclone guidelinesContainers Mirrorclone statesUsing containers preallocation Optimizing replication performancePlanning for host I/O workloads Optimizing snap creationMinimizing snapclone workloads Minimizing the number of snapshotsMinimizing simultaneous replication operations HP P6000 Continuous Access software Working with DR groups in HP P6000 Command ViewDR groups Creating DR groups Data replication protocol optionsReplicating storage Maintaining and managing HP P6000/EVA storage systems Initializing storage systemsUser-initiated service mode USER-INITIATED Service Mode Active on this Storage SystemUninitializing storage systems Starting the storage systemShutting down the storage system HSV210A controller rear view Working with hardware in HP P6000 Command View HardwareRemote service test Verifying hardware statusStorage system identity information Using multiple management servers to manage arrays Updating HP controller softwareConfiguring iSCSI devices Monitoring storage system events Events overviewEmail notification Management server event logViewing events Controller termination event logConfiguring event notification Configuring host notificationViewing additional information Filtering events by severity Applying a customized host notification listApplying a customized event configuration file Retrieving the parse fileSelecting individual events Retrieving the Management Information Base Sending the event file Configuring HP P6000 Command View advanced tasks Setting user interface optionsCreating page footer messages Setting audit logging options Setting a remote location for audit logsChanging port and timeout parameters Changing the login credentials array-based managementRunning HP P6000 Command View in a multi-homed environment Https//managementmoduleIPaddress2373Troubleshooting HP P6000 Command View Restarting the HP P6000 Command View serviceUsing the right-click menu Optimizing performanceNavigation pane lists duplicate arrays Error messages in the user interface Failed communication link to iSCSI devicesFailed connection warning for empty controller host ports Failed entities reported on the disk enclosureTroubleshooting access to array-based HP P6000 Command View Failed blower power supplyFailed transceiver Failed I/O moduleUnexpected behavior when using older Windows HBA driver Storage system connection down error messageVirtual disk sizes displayed incorrectly IPFilter page incorrectly displays IPv6 addressVersion numbers differ Webes 5.5 receiving events inconsistentlyComponents \Program Files\Hewlett-Packard\EVA Performance MonitorDisplaying historical state changes and performance data HP P6000 Performance Data Collector valid objecttype valuesConfiguring the HP P6000 Command View server HP P6000 Performance Data Collector objectid valuesConfiguration file for performance and state data logging Displaying HP P6000 Command View access credentialsConfiguring HP P6000 Performance Data Collector Logging configuration fileEvents and logs Configuration recommendations Connecting to HP P6000 Performance Data Collector remotelyProhibited commands SSL protocolUsing friendly names Backward compatibilityCreating the friendly names host file Adding friendly namesMapping worldwide names to friendly names Adding friendly names manuallyUsing short names Using the command line interface Viewing arraysSpecifying the output Refreshing dataFiltering data Specifying data output in multiple filesCommands HP P6000 Performance Data Collector commandsLuns Command modifiers HP P6000 Performance Data Collector command modifiersUsing the graphical user interface NotsPage Configure filtering Data filteringObjects and counters HP EVA storage array HP EVA storage controllerHP EVA virtual disk HP EVA virtual disk group HP EVA host connection HP EVA host port statisticsHP EVA physical disk HP EVA physical disk groupHP EVA DR tunnels HP EVA DR Group Information Support and other resources Contacting HPRelated information Typographical conventions WebsitesDocument conventions HP array event code formats and descriptions Event code formatEvent code types and descriptions Software component IDsCorrective action codes Event information packet EIP typesHP array event information packet EIP types Coupled crash control codes HP array coupled crash control codesDump/restart control codes HP array dump/restart control codesGlossary EVASAN See also virtual disk Index CLIIndex 105
Related manuals
Manual 29 pages 54.3 Kb
Top Page Image Contents