HP P6000 manual Luns

Table 6 HP P6000 Performance Data Collector commands (continued)

Command	Description
fn [short]	Performs the following series of tasks:

•Scans the hosts on the friendly name host list.

•Queries HP P6000 Command View on each host for known friendly name information.

•Adds the friendly name information found to the fnames.conf file.

h, help, or evaperf without	Displays help for HP P6000 Performance Data Collector.
a modifier
hc	Displays host connection information. The Port column in the output does not display
	data for the HSV200 series of controllers onward; therefore, a hyphen (—) appears in
	the Port column.
hist	Displays the performance data/state changes for objects of a specified type within the
	specified time range.
hps	Displays host port statistics. The field Port WWN is included as part of the hps command
	output in HP P6000 Performance Data Collector. This field provides the WWN of the
	host port.
ls	Displays a list of arrays that are visible to the host.
luns	Displays LUNs visible to the host.
mof	Displays output for the ls, as, cs, vd, vdg, hc, ps, hps, pd, pdg, drg, and drt
	commands and saves the output for each command in a separate file. The -odmodifier
	is required.
pd	Displays physical disk data.
pda	Displays statistics for physical disk activity.
pdg	Displays the total physical disk data by disk group.
pfa [array]*	In Windows Performance Monitor, sets the array filter list.
pfd	Deletes the filter configuration for Windows Performance Monitor.
pfh	Displays help for the Windows Performance Monitor filter commands.
pfs	Displays the filter configuration for Windows Performance Monitor.
pfvd [vdisk]*	In Windows Performance Monitor, sets the virtual disk filter list.
ps	Displays Fibre Channel port status.
rc	Resets the error counters reported by the ps command.
server host port	Configures HP P6000 Performance Data Collector RPC server for remote client.
[username] [-usessl]
showcvconfig	Displays HP P6000 Command View login parameters used for state data collection.
vd	Displays virtual disk statistics and DR log disk information. Only virtual disks that have
	been presented to a host are displayed.
vdg	Displays the total virtual disk data by disk group.
vdts	Displays virtual transfer size histograms. This command is available on the HSV200
	series of controllers onward.
vdtsg [lunwwn]	Graphs virtual disk transfer size histograms for all LUNs or a given WWN. This command
	is available on the HSV200 series of controllers onward.
vdrl	Displays virtual disk read latency histograms. This command is available on the HSV200
	series of controllers onward.

Using the command line interface 83