HP 120 Inkjet Multifunction 120 manual Wireless with a router infrastructure network

Page 34

Connectivity

Chapter 8

❑Touch WiFi Protected Setup.

❑Touch PIN.

b. Set up wireless connection.

❑Touch Start.

The device displays a PIN.

❑Enter PIN on WPS-enabled router or other networking device.

NOTE: The product begins a timer for approximately two minutes in which the PIN needs to be entered on the networking device.

❑Touch OK.

c. Install software.

Wireless with a router (infrastructure network)

To connect the HP ENVY 120 series to an integrated wireless WLAN 802.11 network, you will need the following:

❑A wireless 802.11 network that includes a wireless router or access point.

❑A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP ENVY 120 series on.

❑Broadband Internet access (recommended) such as cable or DSL.

If you connect the HP ENVY 120 series on a wireless network that has Internet access, HP recommends that you use a wireless router (access point or base station) that uses Dynamic Host Configuration Protocol (DHCP).

❑Network name (SSID).

❑WEP key or WPA Passphrase (if needed).

To connect the product with the Wireless Setup Wizard

1.Write down your network name (SSID) and WEP key or WPA passphrase.

2.Start Wireless Setup Wizard.

a. From the Home screen on the printer display, touch the Wireless icon.

b. On the Wireless summary screen, touch Settings and then touch Wireless Setup Wizard.

3.Connect to wireless network.

▲Select your network from the list of detected networks. Enter the password and touch Done.

4.Follow prompts.

Related topics

•Install the software for a network connection on page 32

Install the software for a network connection

Use this section to install the HP ENVY software on a computer connected to a network. Before you install the software, make sure you have connected the HP ENVY 120 series to a network. If the HP ENVY 120 series has not been connected to a network, follow the onscreen instructions during the software installation to connect the product to the network.

NOTE: Installation time can vary depending on your operating system, the amount of available space, and the processor speed of your computer.

32 Connectivity

Page 33 Page 35
Image 34
Page 33 Page 35
Contents HP Envy 120 e-All-in-One series Page Contents Technical information HP Envy 120 e-All-in-One series Help HP EnvyChapter Printer parts Get to know the HP Envy 120 seriesFront view of the printer Transparent Lid Control panel features Chapter How do I? How do I? Print photos from a memory card PrintPrint photos Related topicsPrint photos saved on your computer Print documentsTo print a photo on photo paper To print a group of addresses on labels or envelopes Print labels and envelopesTo print from a software application On Paper/Quality tab select a Plain paper typeRecommended papers for photo printing Select Print MediaColorLok Load media Recommended papers for printing and copyingRelated topics Tips for print success Print Copy text or mixed documents Copy and scanSided copy a. Load paper Sided copy a. Load paper Touch Settings Scan to a computer, memory device, or emailTips for copy and scan success Print with HP ePrint Use Web ServicesHow to get started with ePrint Use HP Print AppsTips for printing apps and using ePrint Tips for using Web ServicesVisit the HP ePrintCenter website Replace the cartridges Work with cartridgesCheck the estimated ink levels To replace the cartridgesInsert new cartridge Remove cartridge from packaging Order ink supplies Clean cartridgesAlign printer Clean paper feed Use single-cartridge modeClean back of page ink smearing Exit single-cartridge modeCartridge warranty information Tips for working with inkWork with cartridges Connectivity WiFi Protected Setup WPSAdd the HP Envy 120 series to a network Touch WiFi Protected Setup Wireless with a router infrastructure networkInstall the software for a network connection To connect the product with the Wireless Setup WizardChange from a USB connection to a wireless network To change from a USB connection to a wireless networkWireless Direct Change network settingsConnect a new printer Tips for setting up and using a networked printer Connectivity Unable to print Solve a problemGet more help To verify that the product is not paused or offlineTo restart the print spooler To verify that the product is set as the default printerClick Manage, and then click Services and Applications Windows XPSolve networking problem Resolve print quality issuesResolve copy and scan issues To clear the print queueClear jam from input/output area Clear a paper jamTo clear a paper jam Clear jam from paper pathSolution 1 Make sure that the printer is turned on Check cartridge access doorTroubleshooting print carriage jams Solution 2 Unblock the print carriageHP support Register your printer HP support by phoneAdditional warranty options Phone support period Placing a callSolve a problem Print resolution Draft mode SpecificationsEnvironmental specifications Technical informationPhoto-Best mode Normal modePlain-Best mode Max DPI mode with supported types of HP photo paperInk cartridge yield Scan specifications Print specificationsCopy specifications Environmental product stewardship programYour products Eco features Eco-TipsTo set Energy Save Mode To enable or disable Auto Power-OffTouch Preferences Chemical Substances Restriction of hazardous substance Ukraine Regulatory notices Regulatory model identification number Technical information Products with wireless LAN devices Regulatory wireless statementsFrance Chapter Technical information Technical information Chapter Symbols/Numerics IndexIndex
Top Page Image Contents