To configure the chilled water supply low temperature alarm parameters:
1.Select Chilled Water Supply Low Alarm Temperature. A keypad appears.
2.Enter a temperature alarm parameter.
3.Select Save to store the new parameters in the system configuration file.
To configure the chilled water supply high temperature alarm parameters:
1.Select Chilled Water Supply High Alarm Temperature. A keypad appears.
2.Enter a temperature alarm parameter.
3.Select Save to store the new parameters in the system configuration file.
Configuring the chilled water return temperature alarm parameters
The current temperature parameters appear on the related buttons.
To configure the chilled water return low temperature alarm parameters:
1.Select the Chilled Water Return Low Alarm Temperature. A keypad appears.
2.Enter a temperature alarm parameter.
3.Select Save to store the new parameters in the system configuration file.
To configure the chilled water return high temperature alarm parameters:
1.Select the Chilled Water Return High Alarm Temperature. A keypad appears.
2.Enter a temperature alarm parameter.
3.Select Save to store the new parameters in the system configuration file.
Setting the dimensions of the ECS
To set the dimensions of the ECS:
1.Select Dimensions.
2.Select the dimensions (metric or imperial) to be displayed throughout the ECS interface.
3.Select Save.
Advanced System Configuration screen
You can only access this screen after you have entered a