HP 620n Fast Ethernet Print Server manual Cfg Ipx/Spx=, Cfg Link=, Web=, Https, Security=

Table C-1. EIO Classic Control Panel Menu (3 of 3)

Menu Item	Description
CFG IPX/SPX=	Selects whether you want to access the IPX/SPX menu
	and set IPX/SPX protocol parameters.
	NO (default): Bypass the IPX/SPX menu items.
	YES: Access the IPX/SPX menu items.
	In the IPX/SPX menu, you can specify the Frame Type
	parameter used on your network.
	AUTO (default) will automatically set and limit the frame
	type to the first one detected.
	For Ethernet cards, frame type selections include
	EN_8023, EN_II, EN_8022, EN_SNAP.
CFG LINK=	Selects whether you want to manually configure the
	HP Jetdirect print server’s network link.
	NO (default): Bypass the link configuration menu
	items.
	YES: Access the link configuration menu items.
	One of the following link configurations can be set:
	AUTO (default): The print server will automatically
	configure itself to match the network’s link speed and
	communication mode. If it fails, 10T HALF or 100T HALF
	is set.
	10T HALF: 10 Mbps, half-duplex operation.
	10T FULL: 10 Mbps, full-duplex operation.
	100T HALF: 100 Mbps, half-duplex operation
	100T FULL: 100 Mbps, full-duplex operation
WEB=	For configuration management, specify whether the
	embedded Web server will accept communications
	using HTTPS (Secure HTTP) only, or both HTTP and
	HTTPS.
	HTTPS: For secure, encrypted communications,
	only HTTPS access is accepted. The print server
	will appear as a secure site.
	HTTP/HTTPS: Access using either HTTP or
	HTTPS is permitted.
SECURITY=	Specify whether the current security settings on the print
	server will be saved or reset to factory defaults.
	KEEP (default): The current security settings are
	maintained.
	RESET: Security settings are reset to factory
	defaults.

ENWW HP Jetdirect EIO Control Panel Menus 38