HP 620n Fast Ethernet Print Server manual Config, Method, Dhcp Release, Dhcp Renew

Table C-2. EIO Graphical Control Panel Menu (2 of 5)

Menu Item	Options	Description of settings
	CONFIG	Specifies the method that TCP/IP
	METHOD	parameters will be configured on the
		Jetdirect print server.
		BOOTP: Use BootP (Bootstrap
		Protocol) for automatic configuration
		from a BootP server.
		DHCP: Use DHCP (Dynamic Host
		Configuration Protocol) for automatic
		configuration from a DHCP server. If
		selected and a DHCP lease exists,
		DHCP RELEASE and DHCP
		RENEW menus will be available to set
		DHCP lease options.
		AUTO IP: Use automatic link-local IP
		addressing. An address in the form
		169.254.x.x will be automatically
		assigned.
		MANUAL: Use the Manual Settings
		option to configure TCP/IP
		parameters.
	DHCP RELEASE	This menu appears if CONFIG METHOD
		was set to DHCP and a DHCP lease for
		the print server exists.
		NO (default): The current DHCP lease
		is saved.
		YES: The current DHCP lease along
		with the leased IP address are
		released.
	DHCP RENEW	This menu appears if CONFIG METHOD
		was set to DHCP and a DHCP lease for
		the print server exists.
		NO (default): The print server does
		not request to renew the DHCP lease.
		YES: The print server requests to
		renew the current DHCP lease.

ENWW HP Jetdirect EIO Control Panel Menus 40