HP 620n Fast Ethernet Print Server manual Secure, Web, Reset, Security, Link, Speed

Table C-2. EIO Graphical Control Panel Menu (5 of 5)

Menu Item	Options	Description of settings
SECURE		For configuration management, specify
WEB		whether the embedded Web server will
		accept communications using HTTPS
		(Secure HTTP) only, or both HTTP and
		HTTPS.
		HTTPS REQUIRED: For secure,
		encrypted communications, only
		HTTPS access is accepted. The print
		server will appear as a secure site.
		HTTPS OPTIONAL: Access using
		either HTTP or HTTPS is permitted.
RESET		Specify whether the current security
SECURITY		settings on the print server will be saved
		or reset to factory defaults.
		NO (default): The current security
		settings are maintained.
		YES: Security settings are reset to
		factory defaults.
LINK		Selects the network link speed and
SPEED		communication mode for the print server.
		For proper communications, the Jetdirect
		settings must match the network.
		AUTO (default): The print server will
		automatically configure itself to
		match the network’s link speed and
		communication mode. If it fails, 10T
		HALF or 100T HALF is set.
		10T HALF: 10 Mbps, half-duplex
		operation.
		10T FULL: 10 Mbps, full-duplex
		operation.
		100T HALF: 100 Mbps, half-duplex
		operation
		100T FULL: 100 Mbps, full-duplex
		operation

ENWW HP Jetdirect EIO Control Panel Menus 43