HP 449298-001 manual Enclosure

Page 12

Item

Description

 

 

WwnPool

The pre-defined WWN pool to use for address assignment. Valid values include

 

integers 1-64. This property is only valid if the WwnType is set to "VC-Defined".

 

If not specified, the default pool ID is 1.

 

 

Examples:

 

 

 

 

->set domain Name=MyNewDomainName

 

Changes the name of the Virtual Connect domain

 

 

 

->set domain DomainIp=Enabled

 

Enables the domain IP address

 

 

 

->set domain DomainIp=Enabled IpAddress=192.168.0.120

 

SubnetMask=255.255.255.0 Gateway=192.168.0.1

 

Configures the domain IP address and enables it

 

 

 

->set domain DomainIp=Disabled

 

Disables the domain IP address and uses DHCP instead

 

 

 

->set domain MacType=VC-Defined MacPool=10

 

Sets the MAC address source to VC-Defined with a pre-defined range

 

 

 

->set domain MacType=Factory-Default

 

Set the MAC address source to use factory default MAC addresses

 

 

 

->set domain MacType=User-Defined MacStart=00-17-A4-77-00-

 

00 MacEnd=00-17-A4-77-00-FF

 

Sets the MAC address source to a custom, user-defined address range

 

 

 

->set domain WwnType=VC-Defined WwnPool=5

 

Sets the WWN address source to VC-Defined with a pre-defined range

 

 

 

->set domain WwnType=Factory-Default

 

Sets the WWN address source to use factory default WWN addresses

 

 

Item

Description

 

 

show domain

Display general Virtual Connect domain information, such as the Virtual Connect

 

domain name and the VCM domain IP address settings

 

 

Syntax

show domain [addressPool]

 

 

Examples:

 

 

 

 

->show domain

 

Displays domain information

 

 

 

->show domain addressPool

 

Displays the VC defined address pools for the domain

 

 

enclosure

Manage general enclosure settings and information.

Supported actions: help, import, show

Item

Description

 

 

import enclosure

Import an enclosure into the domain

 

 

Command line 12

Image 12
Contents HP Virtual Connect Manager Command Line Interface User Guide Audience assumptions Contents Technical support Command line overview IntroductionVirtual Connect overview Command line syntax Subcommand managed element parameters options propertiesParameters OptionsCLI command execution modes PropertiesRemote access to the Virtual Connect Manager Command line SubcommandsManaged elements Devicebay DomainSupported actions delete, help, set, show Enclosure Enet-connection Supported actions add, help, remove, setNetwork=SomeNetwork2 PXE=enabled AddressType=Factory-DefaultAddressType EthernetMACExternal-manager Fabric Fc-connection Support actions help, show, update FirmwareIgmp InterconnectLdap Ldap-group Supported actions add, help, remove, set, showMac-cache Network Profile Add profile MyNewProfile2 -NoDefaultEnetConn Add profile MyNewProfile2 -NoDefaultFcConnAdd profile MyNewProfile Assign profileSupported actions help, poweroff, poweron, reboot, show ServerPoweroff server enc02 Poweroff server enc02 -ForcePoweroff server enc0 Poweroff server enc02 -ForceOnTimeoutStackinglink Status SystemlogUplinkport Set uplinkport Set uplinkport PortID Network=NetworkNameSpeed=Auto10Mb100Mb1GbDisabled Set uplinkport enc012 Network=MyNetwork Speed=1GbUplinkset User Set user steve Password=fgY87hHl Set user steve PasswordSet user bill Password=HGtwf7272562 Remove user steveHelp subsystem VcmVersion Command line Output format Interactive user output formatBrad Domain Brad Mills Brad.mills@hp.com True Server Scriptable output format Command line Configuring the Virtual Connect domain using the CLI Basic configurationSsh 192.168.0.120 login as Administrator password Ssh 192.168.0.120 login as AdministratorDomain setup Setting the domain nameConfiguring local users Importing an enclosureAdd user bob password=fhkjdhfk privileges=domain,network Set user bob fullname=Bob J Smith enabled=falseRemove user bob Remove userNetwork setup Configuring Ldap authentication support for usersConfiguring MAC Address ranges Assigned MAC addresses Creating an enet-network Adding uplink ports to an enet-networkCreating a shared uplink port set Fibre Channel setup Configuring WWN address rangesAdding uplink ports to a shared uplink port set Creating a network that uses a shared uplink port setServer Profile setup Modifying FC fabric propertiesDisplaying FC fabrics Set fabric name=MyNewName portspeed=4GbConfiguring the Virtual Connect domain using the CLI Configuring Igmp settings Creating server profilesAdding enet-network connections to a profile Adding FC fabric connections to a server profileConfiguring MAC cache failover settings Set mac-cache enabled=true refresh=10Common management operations Logging out of the CLIResetting the Virtual Connect Manager Reset vcm Reset vcm -failoverVirtual Connect Manager not found at this IP address Technical support Before you contact HPHP contact information Acronyms and abbreviations IgmpPXE Index Index