HP 449298-001 manual Fc-connection

Page 17

fc-connection

Manage Fibre Channel SAN fabric connections.

Supported actions: add, help, set

Item	Description

add fc-connection	Add a new FC SAN connection to an existing server profile

Syntax	add fc-connection <ProfileName> [Fabric=<FabricName>]
	[Speed=<Auto2Gb4GbDisabled>]

Parameters:

ProfileName	The name of an existing profile to which the new connection is added.
	(required)

Properties:

Fabric	The name of an existing fabric to associate with the connection. If the fabric
	name is not specified, it will be assigned to the next available SAN Fabric.

Speed	The port speed of the connection port. Valid values include Auto, 2Gb, 4Gb,
	and Disabled. If not specified, then the default port speed is set to "Auto".

AddressType	The source of WWN address assignments to be used during the creation of
	the new connection. If not specified, the default is the domain default. If
	"UserDefined" is specified, then both a Port WWN and Node WWN must
	also be specified. Valid values include Vc-Defined, Factory-Default, and User-
	Defined.

PortWWN	The user-defined Port WWN address to use for the connection. This property
	is required if the AddressType specified is "User-Defined".

NodeWWN	The user-defined Node WWN address to use for the connection. This
	property is required if the AddressType specified is "User-Defined".

Examples:

	->add fc-connection MyNewProfile Fabric=SAN_5
	Adds a new FC SAN fabric connection to a profile

	->add fc-connection MyNewProfile Fabric=SomeFabric
	Speed=4Gb
	Adds a new FC SAN connection and configures the port speed

	->add fc-connection MyNewProfile
	Adds a new FC SAN connection and uses the next available fabric

	->add fc-connection MyNewProfile AddressType=Factory-
	Default
	Adds a new FC SAN connection and uses factory-default addresses

	->add fc-connection MyNewProfile AddressType=Vc-Defined
	Adds a new FC SAN connection and uses VC-defined addresses

	->add fc-connection MyNewProfile AddressType=User-
	Defined PortWWN=50:06:0B:00:00:C2:62:00
	NodeWWN=50:06:0B:00:00:C2:62:00
	Adds a new FC SAN connection and provides user-defined WWN addresses

Item	Description

set fc-connection	Modify an existing server profile connection

Command line 17

Image 17

Contents HP Virtual Connect Manager Command Line Interface User Guide Audience assumptions Contents Technical support Virtual Connect overview Command line overviewIntroduction Subcommand managed element parameters options properties Command line syntaxParameters OptionsProperties CLI command execution modesRemote access to the Virtual Connect Manager Managed elements Command lineSubcommands Domain DevicebaySupported actions delete, help, set, show Enclosure Supported actions add, help, remove, set Enet-connectionAddressType=Factory-Default Network=SomeNetwork2 PXE=enabledAddressType EthernetMACExternal-manager Fabric Fc-connection Firmware Support actions help, show, updateInterconnect IgmpLdap Supported actions add, help, remove, set, show Ldap-groupMac-cache Network Profile Add profile MyNewProfile2 -NoDefaultFcConn Add profile MyNewProfile2 -NoDefaultEnetConnAdd profile MyNewProfile Assign profileServer Supported actions help, poweroff, poweron, reboot, showPoweroff server enc02 -Force Poweroff server enc02Poweroff server enc0 Poweroff server enc02 -ForceOnTimeoutStackinglink Uplinkport StatusSystemlog Set uplinkport PortID Network=NetworkName Set uplinkportSpeed=Auto10Mb100Mb1GbDisabled Set uplinkport enc012 Network=MyNetwork Speed=1GbUplinkset User Set user steve Password Set user steve Password=fgY87hHlSet user bill Password=HGtwf7272562 Remove user steveVersion Help subsystemVcm Command line Interactive user output format Output formatBrad Domain Brad Mills Brad.mills@hp.com True Server Scriptable output format Command line Basic configuration Configuring the Virtual Connect domain using the CLISsh 192.168.0.120 login as Administrator password Ssh 192.168.0.120 login as AdministratorSetting the domain name Domain setupConfiguring local users Importing an enclosureSet user bob fullname=Bob J Smith enabled=false Add user bob password=fhkjdhfk privileges=domain,networkRemove user bob Remove userConfiguring MAC Address ranges Network setupConfiguring Ldap authentication support for users Assigned MAC addresses Creating a shared uplink port set Creating an enet-networkAdding uplink ports to an enet-network Configuring WWN address ranges Fibre Channel setupAdding uplink ports to a shared uplink port set Creating a network that uses a shared uplink port setModifying FC fabric properties Server Profile setupDisplaying FC fabrics Set fabric name=MyNewName portspeed=4GbConfiguring the Virtual Connect domain using the CLI Creating server profiles Configuring Igmp settingsAdding enet-network connections to a profile Adding FC fabric connections to a server profileSet mac-cache enabled=true refresh=10 Configuring MAC cache failover settingsCommon management operations Logging out of the CLIReset vcm Reset vcm -failover Resetting the Virtual Connect ManagerVirtual Connect Manager not found at this IP address HP contact information Technical supportBefore you contact HP Igmp Acronyms and abbreviationsPXE Index Index