HP 449298-001 Add uplinkport enc011 Network=MyNetwork, Remove uplinkport, UplinkSet=UplinkSetName

Item	Description
	->add uplinkport enc0:1:1 Network=MyNetwork
	Adds a new uplink port (Bay 1, Port 1) to a network
	->add uplinkport enc0:2:4 Network=MyNetwork Speed=1Gb
	Adds a new uplink port (Bay 2, Port 4) to a network and sets the port speed
	->add uplinkport enc0:2:3 UplinkSet=MyUplinkSet
	Adds a new uplink port (Bay 2, Port 3) to a shared uplink port set

Item	Description
remove uplinkport	Remove an uplink port element from a network or a shared uplink port set
Syntax	remove uplinkport <PortID> [Network=<NetworkName>
	UplinkSet=<UplinkSetName>]
Parameters:
PortID	The name of the port to remove from a network. (required). The port name must be in
	the following format:
	<EnclosureID>:<InterconnectBayNumber>:<PortNumber>
	If EnclosureID is not specified, it defaults to the local enclosure.
Network	The name of the network from which the port is removed
UplinkSet	The name of the shared uplink port set from which the port is removed
Examples:
	->remove uplinkport enc0:1:2 Network=MyNetwork
	Removes a specific uplink port (Bay 1, Port 2) from a network
	->remove uplinkport * Network=BlueNetwork
	Removes all uplink ports from a network named "BlueNetwork"
	->remove uplinkport enc0:2:3 UplinkSet=SharedUplinkSet1
	Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set

Item	Description
set uplinkport	Modify an uplink port that exists as a member of a network or shared uplink port set
Syntax	set uplinkport <PortID> [Network=<NetworkName>
	UplinkSet=<UplinkSetName>]
	Speed=<Auto10Mb100Mb1GbDisabled>
Parameters:
PortID	The name of the port to modify (required). The specified port must already be added
	to a network or uplink port set. The port name is in the format:
	<EnclosureID>:<BayNumber>:<PortNumber>
Properties:
Network	The name of the network to which the port belongs
UplinkSet	The name of the shared uplink port set to which the port belongs
Speed	Specifies the port speed for the port. Acceptable values include Auto, 10Mb,
	100Mb, 1Gb, and Disabled.
Examples:
	->set uplinkport enc0:1:2 Network=MyNetwork Speed=1Gb
	Changes the port speed of a network port

Command line 30