HP 449298-001 manual Network

network

Manage Virtual Connect Ethernet networks.

Supported actions: add, help, remove, set, show

Item	Description
add network	Create a new Ethernet Network. After the network has been created, uplink ports
	can be added, if the network is not using a shared uplink port set.
Syntax	add network <NetworkName> [UplinkSet=<UplinkSetName>
	VLanID=<VLanID>] [State=<EnabledDisabled>]
	[SmartLink=<EnabledDisabled>]
Parameters:
NetworkName	The unique name of the new network to create (required)
Properties:
UplinkSet	The name of an existing shared uplink port set to use with this new network
	(optional). If this property is specified, then a valid VLAN ID must also be provided.
VLanID	The VLAN ID associated with the network (used with shared uplink port set only). The
	VLAN ID is a valid number between 1 and 4094.
State	Enables or Disables the network. Valid values are "Enabled" and "Disabled". The
	default value is "Enabled".
SmartLink	Enables or Disables the SmartLink capability for a port. Valid values are "Enabled"
	and "Disabled". The default value is "Disabled".
Examples:
	->add network MyNewNetwork
	Creates a new network, and then adds it to the domain
	->add network MyNewNetwork2 UplinkSet=MyUplinkSet VLanID=145
	Creates a new network and uses a shared uplink port set
	->add network Network1 State=Disabled SmartLink=Enabled
	Creates a new network with SmartLink Enabled and Status Disabled

Item	Description
remove network	Remove a network from the domain
Syntax	remove network <NetworkName *>
Parameters:
NetworkName	The name of an existing network in the domain
Examples:
	->remove network MyNetwork
	Removes a network
	->remove network *
	Removes all networks

Item	Description
set network	Modify an existing Ethernet network
Syntax	set network <NetworkName> [Name=<NewName>]
	[State=<EnabledDisabled>] [SmartLink=<EnabledDisabled>]
	Command line 23