HP 449298-001 manual Firmware, Support actions help, show, update

Item	Description
Syntax	set fc-connection <ProfileName> <Port>
	[Fabric=<FabricName>] [Speed=<Auto2Gb4GbDisabled>]
	[BootPriority=<priority>] [BootPort=<portName>]
	[BootLun=<LUN>]
Parameters:
ProfileName	The name of the server profile that contains the connection to modify
Port	The port number of the connection being modified
Properties:
Fabric	The name of the FC SAN fabric to associate with the connection
Speed	The port speed of the FC SAN connection. Valid values include Auto, 4Gb,
	2Gb, and Disabled
BootPriority	Controls whether the FC HBA port is enabled for SAN boot and will affect the
	BIOS boot order. Valid values include BIOS, Primary, Secondary, Disabled
BootPort	The target WWPN of the controller interface on the Fibre Channel storage
	target. The port name is a 64-bit identifier in the format:
	NN:NN:NN:NN:NN:NN:NN:NN, where N is a hexadecimal number
BootLun	The LUN of the volume used for SAN boot. Valid values include an integer
	from 0-255.
Examples:
	->set fc-connection MyProfile 1 Fabric=SAN_5
	Changes the fabric of an FC SAN fabric connection
	->set fc-connection RedProfile 2 Fabric=""
	Sets a FC SAN fabric connection to "Unassigned"
	->set fc-connection BlueProfile 1 Fabric=SAN_7
	Changes the FC SAN Fabric of an FC SAN connection
	->set fc-connection BlueProfile 1 Speed=4Gb
	Changes the port speed of a FC SAN connection
	->set fc-connection BlueProfile 1 BootPriority=Primary
	BootPort=50:06:0B:00:00:C2:62:00 BootLun=5
	Changes the SAN boot priority and sets additional boot parameters

firmware

Display or update Virtual Connection firmware version.

Support actions: help, show, update

Item	Description
show firmware	Display current version of firmware of all interconnect modules in the domain
Syntax	show firmware
Examples:
	->show firmware
	Displays current version of the firmware

Command line 18