HP MicroLogix 1761-NET-ENI manual Configuring ENI String Parameters

4-8ENI Configuration (Node 248 to 254)

Configuring ENI String Parameters

Configuring the ENI E-Mail From String

This example illustrates configuring the ENI E-mail From String (Node 249). To configure the E-mail From String, initiate a message with a string element as the data.

EXAMPLE	Node 249 - E-Mail From String
	Node 249 holds the ASCII string that will be sent
	with any e-mail message initiated by the ENI. To
	configure the E-mail From String, initiate a message
	with a string element as the data. To do this, follow
	the procedure below.

TIP	This procedure can also be used for any parameter
	that requires string data (nodes 150 to 199 and 249).

1.Create a valid string file element as illustrated below. This example has data file 25 configured for string elements. In File ST25, element 0 has a valid e-mail from string, Station_0@My_Company.com.

Publication 1761-UM006A-EN-P - February 2001