Connecting | |
|
|
Configuring an Ethernet Driver in RSLINX
addresses do not exist in Logix controllers, so they must be mapped to existing tags in these controllers.
From the Logic pull down menu, select “Map PLC/SLC Messages”. Your mapped table for your 5550 program should look like the following:
Figure 7.24 File Mapping for the ControlLogix 5550 Controller in RSLogix 5000
Save your program.
In order to download your programs to the SLC 5/05 controller and to the 5550 controller via Ethernet, we must configure an Ethernet driver in RSLINX.
In RSLINX, click on the Communications
Modify this screen to include the IP addresses of the SLC 5/05 and the