Connecting | |
|
|
Configure RSLINX and
Download The Program To
The 1769-L20
In the File Number column enter 12. Under the Tag Name, click on the right side in the white box to reveal your Controller Tags and select the tag name you created for this purpose (“Data_From_505” for this example). More than one entry may be mapped. When finished, your Map PLC/SLC screen for the L20 controller should look like the following:
Figure 7.12 File Mapping for the L20 Controller in RSLogix 5000
Save your program.
The ladder program written for the L20 controller is downloaded to the controller via the two ENI modules. A
Start RSLINX. From the “Communication” pull down menu, select “Configure Drivers”. From the Configure Driver screen, click on the arrow next to the “Available Drivers Box” to reveal all RSLINX drivers. Click on “RS232 DF1 devices”, then click on “Add New”. Click OK to the