Connecting | |
|
|
For this example, we will be using 38400 baud on all serial connections. We will also assign IP addresses to all Ethernet products rather than using BOOTP.
Two tabs in the ENI software tool must be modified for the purposes of this example, the “ENI IP Addr” tab and the “Message Routing” tab. The IP address for the ENI connected to the
Figure 7.4 ENI #1 Configuration - ENI IP Addr Screen
Figure 7.5 ENI #1 Configuration - Message Routing Screen
Before we download our configuration to ENI #1, we must configure the “Utility Settings” tab in the ENI configuration tool. Make this tab look like the following.
Figure 7.6 ENI #1 Configuration - Utility Settings Screen
Publication