HP A4800A manual HP e3000

Installing the A4800A Adapter

Verifying Installation

HP e3000	Assuming an N-Class system with an I/O card being added to slot #12,
	we will expect path 1/0/0/0 to be returned for our card.
Step 1.	From BCH menus:
------------------------------------------------------
-Command		Description
-------		-----------
ALL		Display all system information
...
IO		Display I/O interface information
...
--------------------------------------------------
Information Menu: Enter command > io
I/O MODULE INFORMATION
	Path	Slot				IODC
Type	(dec)	Number	HVERSION	SVERSION		Vers
----	-----	------	--------	--------		----
System bus adapter	0		0x8030	0xc10		0x0
Local bus adapter	0/0	Built_In	0x7820	0xa00		0x0
Local bus adapter
...
Local bus adapter	1/0	12	0x7820	0xa00		0x0
...
PCI DEVICE INFORMATION
		Path		Vendor	Device		Bus	Slot
Description		(dec)		Id		Id	#	#
-----------		-----		----	----		---	---
Ethernet cntlr		0/0/0/0		0x1011	0x19		0	Built_In
SCSI bus cntlr		0/0/1/0		0x1000	0xc		0	Built_In
SCSI bus cntlr		0/0/2/0		0x1000	0xf		0	Built_In
SCSI bus cntlr		0/0/2/1		0x1000	0xf		0	Built_In
Comp. ser cntlr		0/0/4/0		0x103c	0x1048		0	Built_In
Comp. ser cntlr		0/0/5/0		0x103c	0x1048		0	Built_In
SCSI bus cntlr		1/0/0/0		0x1000	0xf		128	12

Information Menu: Enter command >main

Main Menu: Enter command or menu > sea 1/0/0/0

Searching for potential boot device(s) - on Path 1/0/0/0

This may take several minutes.

To discontinue search, press any key (termination may not be immediate). Path# Device Path (dec) Device Path (mnem) Device Type

---------------------- ------------------ -----------

P0 1/0/0/0.6 intscsia.6 Random access media Main Menu: Enter command or menu >

32 Chapter 2