HP BOOK 3000 manual To install video support

Page 69

Important

Using Windows NT 4.0

Installing Windows NT 4.0

“OmniBook Windows NT 4.0 Emergency Repair Disk”

31. Press Enter to reboot.

We recommend that you install Windows NT 4.0 Service Pack 3. All Windows NT 4.0 certification testing done on the OmniBook 3000 was done with Service Pack 3 installed. You can obtain Windows NT 4.0 Service Pack 3 from http://www.microsoft.com/support/winnt/nt4sp3.asp

To install video support

Requirements

OmniBook 3000 with Windows NT 4.0 installed.

OmniBook 3000 driver for video support. Location: OmniBook hard drive or Recovery CD in \OMNIBOOK\DRIVERS\NT40\VIDEO.

1.From Control Panel, double-click Display, then click Settings.

2.Click Display Type, then click Change.

3.Click Have Disk in the Change Display window.

4.Enter the directory of the video drivers, then click OK.

5.Select the NeoMagic MagicGraph 128 ZV+/XD, then click OK.

6.Click Yes to confirm.

7.Click OK to accept that the driver was installed correctly.

8.Click Close in the Display Type window. (The new driver will not take effect until after Windows NT has restarted.)

9.Click Close in the Display Properties window.

10.Click Yes to restart the computer.

11.When Windows NT restarts, it will inform you that a new graphics driver has been installed.

12.Click OK.

4-5

Image 69
Contents HP OmniBook Corporate Evaluator’s Guide Page HP Software Product License Agreement Edition History Contents Using Windows Features and Specifications Page Introduction Introduction Page Included in the OmniBook 3000 box Taking InventoryOptional OmniBook accessories Models and configurationsHP OmniBook 3000CTX 5/200 HP OmniBook 3000CTX 5/233Power Management Suspend To turn the OmniBook on and offStandby Mode To use OmniBook power modesTo set up a hibernation partition To reset the OmniBookIntroduction Power Management Checking the Status of the OmniBook To read the status panel indicatorsIndicator Meaning To understand power and battery lights Power LightsBattery Lights Recovering Files, Drivers, and Applications Contents of the Recovery CD To recover a damaged Recovery CD or hard disk drive To use the Recovery CD programming serviceTo update the Bios Protecting the OmniBook To set a passwordTo delete a password Protecting the Hard Disk Drive and Memory To attach a security cableSystem Resources Identifying System ResourcesSystem Interrupts System MemoryValid uses for memory addresses CC000-DFFFF System Input/Output Addresses 100-3FFDMA Channels Using Windows for Workgroups Before you Start RequirementsTo reformat the hard drive Installing Windows for WorkgroupsTo install Windows for Workgroups To install MS-DOSTo install CD-ROM support To install sound support To install video support\OMNIBOOK\DRIVERS\WFW\TOUCHPAD To install TouchPad support\OMNIBOOK\DRIVERS\WFW\PCCARD To install PC Card support\WINDOWS\SYSTEM Installing Cards To install a New Media LiveWire+ Ethernet PC CardConfiguration DEVICE=C\NEWMEDIA\LWPLUS\LWPLUS.EXE /APM=OFF To install a Xircom Ethernet 10/100 + modem PC Card DEVICE=C\DOS\EMM386.EXE Noems X=D000-D3FFF To maximize memory Working with Windows for WorkgroupsTo increase performance To use DriveSpace compressionTo use the OmniBook 3000 Port Replicator Page Using Windows Windows 95 Installation CD To prepare for software installation Installing WindowsTo install Windows Reboot To install video support To install sound support \WINDOWS\INF \OMNIBOOK\DRIVERS\WIN95\TOUCHPAD To install infrared support Using Windows Installing Windows To install the online User’s Handbook Installing OmniBook ApplicationsTo install HP TopTOOLS To install McAffee VirusScanWindows 95A Windows 95B OEM Service ReleaseTo install a Xircom Ethernet 10/100 + Modem PC Card Windows 95 Can’t Find The Driver CEM56.SYS Working with Windows To automatically detect a CDTo run an MS-DOS program outside of Windows To resolve infrared problems If you have problems with infrared communicationsIf an infrared printer doesn’t print Using Windows NT Requirements To install Windows NT Installing Windows NTCD-key is located on the back of the CD jacket To install video support Using Windows NT Installing Windows NT To install sound support Using Windows NT Installing Windows NT Installing Mobile Enhancements To install Phoenix APM To install CardExecutiveTo use Phoenix APM 2.0 with a CD-ROM drive Using the standard Windows NT 4.0 PC Card support Using Phoenix CardExecutive To install a Xircom Ethernet 10/100 + Modem PC Card Using Phoenix CardExecutive To use Windows NT 4.0 on a notebook PC Working with Windows NTTo install Zip Drive support Page Features and Specifications Features and Specifications Mass storage Standard FeaturesPcmcia Bios System Unit Technical SpecificationsExternal Video AC Adapter F1377A Hard Disk Drives To look up technical information Getting Assistance and SupportFeatures and Specifications Getting Assistance and Support Features and Specifications Getting Assistance and Support Features and Specifications Getting Assistance and Support To get HP OmniBook assistance Electronic support services To find Electronic Support ServicesHP Bulletin Board Services BBS Customer Support CentersHP First Post-Sales Fax Retrieval System US/Canada English To contact Customer SupportCanada French Montreal Asia PacificLatin America Africa/Middle EastTo get repair assistance Hewlett-Packard Limited Warranty Summary Service Using Electronic Serial NumbersOmniBook motherboard Configuration To ensure serial number securityTo correct an incorrect serial number About Bios UpdatesIndex Index-2 Index-3 Index-4