HP Installing OmniBook Software for Windows NT 4.0 Enhancements

Using Windows NT 4.0

Installing Mobile Enhancements

To install CardExecutive

If the Phoenix CardExecutive functionality is desired, it should be installed before Windows NT 4.0 networking. CardExecutive adds the following capabilities:

∙Plug and Play for PC Cards using standard Windows NT drivers.

∙Plug and Play for supported network PC Cards.

∙Automatic configuration of PC Cards utilizing advanced “Wizard” technology to allocate system resources.

∙Suspend/Resume functions and simplified administration of PC Cards when integrated with Phoenix CardExecutive.

Important	If you wish to take advantage of CardExecutive’s plug-n-play for PCMCIA network
	cards, you must install CardExecutive before installing Windows NT networking.
	1.	From the \OMNIBOOK\DRIVERS\NT40\PCMCIA directory, run SETUP.
	2.	Click the button to begin the installation process.
	3.	Click OK.
	4.	Click Restart Now.
	5.	After reboot, click Next to run the PC Card Diagnostics.
	6.	Click Next to start the Diagnostics.
	7.	Click Finish to reboot.
		After reboot, you will see a PC Card icon on the Taskbar.

To install Phoenix APM 2.0

Phoenix APM 2.0 adds the following capabilities to the OmniBook:

∙Improved battery life under Windows NT 4.0.

∙PC Card power management.

∙Convenient user control and monitoring of power settings and status.

1.From the \OMNIBOOK\DRIVERS\NT40\APM directory, run SETUP.

4-10