HP BOOK 3000 manual Standard Features, Mass storage

Features and Specifications

Standard Features

Standard Features

Processor	Intel Pentium 200- or 233-processor with MMX technology.
Cache	32K L1 cache.
	512K L2 pipeline burst-synchronous cache.
Architecture	32-bit PCI (Peripheral Component Interconnect) bus architecture.
Mass storage	Industry-standard 2 GB or 4 GB removable Enhanced-IDE hard drive.
	ATA2 Interface, Partial Response Maximum Likelihood recording method.
	Magneto Resistive heads.
	SMART Technology
Memory	16 MB RAM standard on motherboard.
	2 memory slots hold any combination of 8 MB, 16 MB, 32 MB or 64 MB SO-
	DIMM memory.
	Expandable up to 144 MB.
	SDRAM on motherboard, 66 Mhz.
	EDO in expansion slots, 60 ns.
Accessory bay	Side-accessible bay accommodates one of the following:
	∙ 20X Maximum CD-ROM drive.
	∙ 3.5 inch, 1.44 MB flexible disk drive.
	∙ Internal Zip Drive
	∙ Second rechargeable lithium-ion battery.
Flexible disk drive	Manufacturer: Teac.
	Removable 3.5-inch, 1.44 MB drive.
	Integrated in the unit or attached externally through the parallel port (cable
	shipped with each OmniBook 3000).

5-3