HP ZE1000 manual Expandability

Page 61

Reference Information

Hardware Specifications

Power	Rechargeable lithium-ion battery (55 W) or NiMH battery (38.4 W).
	Low-battery warning.
	Suspend/resume capability.
	AC adapter (DC-in) jack.
	Universal AC adapter: 100–240 Vac (50/60 Hz) input, 19 Vdc output,
	60–65 W.

I/O Ports	25-pin bi-directional high-speed ECP/EPP parallel (burgundy).
	15-pin external monitor (VGA) video out port (blue).
	Two universal serial bus (USB) ports.
	Built-in modem, supporting Wake up on Ring# from D3 (hot) with AC-in.

Expandability	One Type II or Type III 16-/32-bit PCMCIA slot.

Options	128/256-MB PC133 SODIMM: 3.3 V, 144-pin, SDRAM.
	Built-in LAN.

Environment	Operating temperature: 0 to 40 °C (32 to 104 °F).
	Storage temperature: –20 to 65 °C (–4 to 149 °F).
	Operating humidity: 20% (10% on some models) to 90% RH (0 to 40 °C).
	Operating altitude: up to 3,000 m (10,000 ft) at 25 °C (77 °F).
	Storage altitude: up to 12,000 m (40,000 ft).

Startup Guide

61

Image 61

Contents HP Notebook PC Startup Guide Startup Guide Cord to connect the modem to the telephone wall jack Important safety informationHP Software Product License Agreement Startup Guide Edition History Contents HP Service and Support Troubleshooting and MaintenanceReference Information IndexGetting Started with Your HP Notebook What’s in the box? Taking InventoryTo find more information Front view Identifying Parts of the NotebookBack view Bottom view Power mode Battery chargeStatus lights Identifying Parts of the Notebook Install the battery Setting Up Your NotebookOr disposed of properly To remove the batteryBegins charging Connect AC powerConnect a phone line Turn on the notebook Set up WindowsTo connect to the Internet Register your notebookBy modem By phoneBasic Operation To turn the notebook on and off Operating Your NotebookTo reset your notebook To use the touch pad To change the boot deviceMoving and selecting using the touch pad and click buttons Hot key Does this To use the Fn hot keysYour mobile work environment Working in Comfort with a Notebook PCUsing your notebook computer Batteries and Power Management To check battery status Using Battery PowerTo recharge the battery To respond to a low-battery warningPage Add-On Devices To install a RAM expansion module Installing Additional RAMReinstall the notebook’s battery To replace the hard disk drive Replacing the Hard Disk DriveTroubleshooting and Maintenance Display problems Troubleshooting TechniquesIf the notebook is on, but the screen is blank Hard disk drive problems Performance problems Keyboard, touch pad, and mouse problemsPower and battery problems If the notebook doesn’t respond when you turn it on Startup problemsIf the notebook won’t boot from battery power If the notebook won’t boot from the floppy disk driveTo run the e-DiagTools diagnostic tests Testing the HardwareTesting the Hardware To run the Bios configuration utility Configuring Your NotebookTo run the Bios configuration utility Configuring Your Notebook Startup Menu Default To recover the factory installation of your hard disk Reinstalling and Updating SoftwareReinstalling and Updating Software HP Service and Support Getting Assistance for Your Notebook To contact HP for support or serviceTo get help from HP Instant Support To get help from the webPavilion Notebooks limited to the following To receive repair service To prepare your notebook for shipment Hewlett-Packard Limited Warranty Statement Product Duration of Limited Warranty Page Reference Information CPU Hardware SpecificationsExpandability Power cords Safety InformationErgonomics Battery safety Laser safety Connections to Peripheral Devices Regulatory InformationResponsible Party Declaration of Conformity U.S.AIndex BiosQuick Start sheet