HP 9000 800t s Z7634-96002 specification

Addendum to D Class Enterprise Servers System Installation Guide

	12. Attach cable retractor (item 26, Figure 1-3) to right main bracket as
	shown.
	13. Attach the slide assemblies to the main brackets using the top row of
	holes (above the base pan). Do not tighten the hardware (items 20, 21)
	yet.

NOTE	These two assemblies are mirror image; ensure that they are oriented as
	shown.
	14. Position the base pan, installed in step 6, to support the slides by

	exerting forceful upward pressure on the base pan; then secure all
	fasteners including on the slides.
	15. Extend slides until they lock and position the mounting tray (Figure
	1-4, item 13) to the front extensions as shown. Engage alignment pins
	for proper location and secure with item 19 hardware. Test for proper
	installation by sliding to full extent of travel in and out. (Slide release
	buttons are on sides of slide channels near front.)

Chapter 1

12. Attach cable retractor (item 26, Figure 1-3) to right main bracket as