Roberts Gorden BH50UT/EF, BH35UT/EF, BH30UT/EF, BH40DL, BH15UT Wall Mounting, Hardware Installation

BLACKHEAT® INSTALLATION OPERATION AND SERVICE MANUAL

10.7 Wall Mounting

Install wall mounting brackets at the height shown in the layout drawing provided by the estimator. Space wall mounting brackets and hangers as indicated by dimensions d, e and f (u-tube) in the relevant layout overview drawing for your heater. For linear heaters see Page 15, Figure 20, for double linear heaters see Page 18, Figure 22 and for U-tube heaters see Page 28, Figure 24.

10.7.1 Hardware Installation

The wall mounting brackets must be attached to a

suitable wall through all mounting holes. Screw sizes less than M8 (5/16") may not be used. In order for the wall

Figure 27: U-Tube (Horizontal)

mounting brackets to adequately carry the weight of the heater, it must be installed with best building practice.

Model	Quantity of Wall	Model	Quantity of Wall
	Mounting Brackets		Mounting Brackets
BH15UT	2	BH15ST	3
BH20UT	3	BH20ST	4
BH25UT/EF	3	BH25ST/EF	4
BH30UT/EF	3	BH30ST/EF	5
BH35UT/EF	3	BH35ST/EF	5
BH40UT/EF	3	BH40ST/EF	5
BH45UT/EF	4	BH45ST/EF	6
BH50UT/EF	4	BH50ST/EF	6

48 of 74