Table 2-13 Solving Memory Problems (continued)
Insufficient memory error during operation.
Cause | Solution |
|
|
Too many Terminate and Stay Resident programs (TSRs) are | Delete any TSRs that you do not need. |
installed. |
|
|
|
You have run out of memory for the application. | Check the memory requirements for the application or add |
| more memory to the computer. |
|
|
Power LED flashes Red five times, once every second, followed by a two second pause, and the computer beeps five times. (Beeps stop after fifth iteration but LEDs continue flashing.)
Cause | Solution |
|
|
Memory is installed incorrectly or is bad.
1.Reseat DIMMs. Power on the system.
2.Replace DIMMs one at a time to isolate the faulty module.
3.Replace
4.Replace the system board.
38 Chapter 2 Troubleshooting Without Diagnostics | ENWW |