HP 1417, 1410xi manual Make the HP All-in-One the default printer, Stop a print job

Chapter 4

Make the HP All-in-One the default printer

You can set the HP All-in-One as the default printer to use from any software application. This means that the HP All-in-One is automatically selected in the printer list when you select Print from the File menu in a software application.

Windows 9x or 2000

1.On the Windows taskbar, click Start, point to Settings, and then click Printers.

2.Right-click the HP All-in-One icon, and click Set as default printer.

Windows XP

1.On the Windows taskbar, click Start, and then click Control Panel.

2.Open the Printers and Faxes control panel.

3.Right-click the HP All-in-One icon, and click Set as default printer.

Mac

1.Open the Print Center (v10.2.3 or later) or Printer Setup Utility (v10.3 or later) from the Applications:Utilities folder.

2.Select the HP All-in-One.

3.Click Make Default.

Stop a print job

Although you can stop a print job from either the HP All-in-One or the computer, HP recommends you stop it from the HP All-in-One for best results.

Cancel

➔Press the Cancel button on the control panel. If the job does not stop printing, press Cancel again.

Print from your computer

20 HP PSC 1400 All-in-One series