HP 1350xi, 1350v, 1355, 1340 manual Feature, Paper Type changes the paper type to Plain or Photo

chapter 1

1

3 2

4

5

6

7

8

9

10

feature purpose

1On/Resume: turns the HP PSC on and off. Also, resumes a copy or print job after a jam or other error. If the HP PSC is in an error state, you can turn it off by pressing On/Resume for 3 seconds.

Warning! When the HP PSC is off, a minimal amount of power is still supplied to the device. Unplug the power cord to completely disconnect the power supply to the HP PSC.

2Check Paper: lights up to indicate the need to load paper or remove a paper jam.

3Check Print Cartridge: lights up to indicate the need to reinsert or replace the print cartridge or close the print carriage access door.

4	Cancel: stops a job or exits button settings.
5	Copies (1-9): changes the number of copies for a copy job.
6	Size: changes the copy image size to either 100% or Fit to Page.
7	Paper Type: changes the paper type to Plain or Photo.
8	Start Copy, Black: starts a black-and-white copy.
9	Start Copy, Color: starts a color copy.
10	Scan: starts a scan of an original from the glass.

2 hp psc 1300 series