5.Reinsert the print cartridge by sliding it forward into the slot on the right. Then push the print cartridge forward until it clicks into the socket.
Solve a problem
6.Repeat steps 1 and 2 for the
If this did not solve the issue, try the next solution.
Solution 2: Clean the print cartridge contacts
Solution: Clean the print cartridge contacts.
Make sure you have the following materials available:
•Dry foam rubber swabs,
TIP: Coffee filters are
•Distilled, filtered, or bottled water (tap water might contain contaminants that can damage the print cartridges).
CAUTION: Do not use platen cleaners or alcohol to clean the print cartridge contacts. These can damage the print cartridge or the product.
To clean the print cartridge contacts
1.Turn on the product and open the print cartridge door.
The print carriage moves to the far right side of the product.
Errors 89