HP 2610xi, 2710xi, 2613, 2610v Set the date and time, Receive a fax manually

Use the fax features

Chapter 11

Receive a fax manually

If you set up your HP all-in-one to receive faxes manually (the Auto Answer option is set to Off) or you answer the phone and hear fax tones, use the instructions in this section to receive faxes.

You can receive faxes manually from a phone that is:

●Directly connected to the HP all-in-one (on the "2-EXT" port)

●On the same phone line, but is not connected to the HP all-in-one

1Make sure the HP all-in-one is turned on and you have paper loaded in the input tray.

2Remove any originals from the glass.

3Set the Rings to Answer setting to a high number to allow you to answer the incoming call before the HP all-in-one answers. Or, set the Auto Answer setting to Off so that the HP all-in-one does not automatically answer incoming calls.

For information on setting the number of Rings to Answer, see Set the number of rings before answering. For information on setting Auto Answer, see Set the answer mode.

4Do one of the following:

–If your phone is on the same phone line (but not plugged into the back of the HP all-in-one) and you hear fax tones from a sending fax machine, wait 5 - 10 seconds before pressing 1 2 3 on your phone. If the HP all-in-one does not begin receiving the fax, wait several more seconds and press 1 2 3 again.

Note When the HP all-in-one receives an incoming call, it displays Ringing on the color graphics display. If you pick up the phone, Phone-Off Hook appears after a few seconds. You must wait until this message appears before pressing 1 2 3 on your phone or you will not be able to receive the fax.

–If your phone is plugged directly into the back of the HP all-in-one and you hear fax tones from a sending fax machine, press the Fax button on the control panel. Press until Receive Fax Manually is highlighted, and then press OK. Press the Start Black or Start Color button on the control panel, and then hang up the telephone.

–If you are currently on the phone with the sender using a phone connected to the HP all-in-one, instruct them to press Start on their fax machine first. Once you hear fax tones from a sending fax machine, press the Fax button on the control panel. Press until Receive Fax Manually is highlighted, and then press OK. Press the Start Black or Start Color button on the control panel, and then hang up the telephone.

Note If you press Start Color but the sender sent the fax in black and white, the HP all-in-one prints the fax in black and white.

Set the date and time

You can set the date and time from the control panel. When a fax is transmitted, the current date and time are printed along with the fax header. The date and time format is based on the language and country/region setting.

112 HP Photosmart 2600/2700 series all-in-one