5.When the image is the size you want, choose Edit/Select from the Place Image menu bar.
6.Draw a box around the image to select it (hold down the left mouse button, draw the box, and release the button). A black box appears within the area you selected.
7.From the main menu bar, choose Special/Paste. The Place Image window closes, and the area you selected is pasted on the fax.
8.Drag the pasted element to the desired location. (If you need to change pages, use Page on the main menu or the Page Turning/Jump to Page tool on the toolbar.)
9.If you want to send the fax now, go on to step 10.
Otherwise, to save the fax without sending it, click the left mouse button anywhere outside the image. You're asked if you want to merge the image with the fax. Click the Yes button. The Save As dialog box appears. Click the OK button to use the same filename, or enter a different filename in the File Name box (changing drive and/or directory, if desired) and click the OK button. If you used an existing filename, you're asked if you want to replace the existing file; click the Yes button. You'll see a "Merging" message. When you finish this procedure, the saved file is displayed in the Eclipse FAX SE window.
10.To send the fax now, choose Send/Send Fax from the main menu. You're asked if you want to merge the image with the fax. Click the Yes button. The Save As dialog box appears. Click the OK button to use the same filename, or enter a different filename in the File Name box (changing drive and/or directory, if desired) and click the OK button. If you used an existing filename, you're asked if you want to replace the existing file; click the Yes button. You'll see "Merging" and "Processing" messages, and then your fax is sent at the scheduled time. When you finish this procedure, you return to the Windows application where you started.