Receiving a Fax
How you receive a fax depends primarily on the Receive Mode setting (set either through the HP OfficeJet LX Manager or through the front panel menus). Where you receive a fax depends on the HP OfficeJet LX Manager's OfficeJet Setup/Route Received Faxes setting.
The following table describes how to receive a fax for each Receive Mode setting.
Note:`For more information on setting this mode, refer to chapter 2.
Receive Mode Setting
Auto
Manual
Fax/TAM
How to Receive a Fax
No action is required.
When the HP OfficeJet LX rings, pick up the handset of the telephone attached directly to the HP OfficeJet LX, listen for the fax tone, press the Start/Copy button, then hang up the phone.
Notes:
1)If you happen to be talking to the sender on a telephone attached directly to the HP OfficeJet LX, wait to hear the sender's fax tone, then press the Start/Copy button. You can stay on the line while the fax is being received. After the transmission is complete, you can resume your telephone conversation.
2)Make sure no documents are in the fax loading tray when you are receiving a fax in Manual mode; they may be faxed to the sender.
No action is required, with the exception noted below.
Note: If you happen to be talking to the sender on a telephone attached directly to the HP OfficeJet LX, wait to hear the sender's fax tones, then press the Start/Copy button. You can stay on the line while the fax is being received. After the transmission is complete, you can resume your telephone conversation.
Forward`vi