HP 2200 manual Tips for loading other types of paper in the paper tray, Paper Tips

hp psc 2200 series

tips for loading other types of paper in the paper tray

The following table provides guidelines for loading certain types of paper and transparency film. For best results, adjust the paper settings each time you change paper types and paper sizes. For more information, see set the paper type on page 13.

paper	tips
HP papers	•	HP Premium Inkjet Paper: Locate the gray arrow on the nonprinting
		side of the paper, and then insert paper with the arrow side facing up.
	•	HP Premium or Premium Plus Photo Paper: Load the glossy (print) side
		down. Always load at least five sheets of regular paper in the paper
		tray first, and then place the photo paper on top of the regular paper.
	•	HP Premium Inkjet Transparency Film: Insert the film so that the white
		transparency strip (with arrows and the HP logo) is on top and is
		going into the tray first.
	•	HP Inkjet T-shirt Transfer Iron-On: Flatten the transfer sheet completely
		before using it; do not load curled sheets. (To prevent curling, keep
		transfer sheets sealed in the original package until you are ready to
		use them.) Manually feed one sheet at a time, with the unprinted side
		facing down (the blue stripe faces up).
	•	HP Matte Greeting Cards, HP Glossy Greeting Cards, or HP Felt-
		Textured Greeting Cards: Insert a small stack of HP greeting-card
		paper, with the print-side down, into the paper tray until it stops.
Labels	•	Always use letter-size or A4-size label sheets designed for use with
(works only with		HP inkjet products (like Avery Inkjet Labels), and make sure that the
printing)		labels are not over two years old.
	•	Fan the stack of labels to make sure none of the pages are sticking
		together.
	•	Place a stack of label sheets on top of standard paper in the paper
		tray, print-side down. Do not insert labels one sheet at a time.
Postcards or hagaki	Insert a stack of postcards or hagaki cards with the print-side down into
cards (only works	the paper tray until it stops. Line the postcards up on the right side of the
with printing)	paper tray, slide the width guide up against the left side of the cards, and
	then slide the paper-length guide in until it stops.

12 load originals and load paper