hp psc 2200 series
1Press Fax, if not already lit.
2Press Options.
–Press Enter to select Fax Mode, then enter the fax number.
–Or, press 
until Speed Dials appears, press Enter, then select a speed dial.
3Press Options until Lighter/Darker appears.
The range of values appears as a circle on a scale on the display.
4Press 
to lighten the fax or 
to darken it.
The circle moves to the left or right, depending on the button you press.
5Press Enter to use the selected setting.
redial a busy or unanswered number automatically
You can set your HP PSC to redial a busy or an unanswered number automatically. The default setting for Busy Redial is Redial. The default setting for No Answer Redial is No Redial.
1Press Setup.
2Do one of the following:
–Press 4, then press 3.
This selects Advanced Fax Setup, then selects Busy Redial.
–Press 4, then press 4 again.
This selects Advanced Fax Setup, then selects No Answer Redial.
3Press 
to select Redial or No Redial, as desired.
4 Press Enter.
use error correction mode (ECM)
ECM eliminates data lost due to poor phone lines by detecting errors that occur during transmission and automatically requesting retransmission of the erroneous portion. Phone charges are unaffected, or may even be reduced, on good phone lines. On poor phone lines, ECM increases sending time and phone charges, but sends the data much more reliably. Turn ECM off (the default setting is on) only if it increases phone charges substantially and you are willing to accept poorer quality in exchange for reduced charges.
1Press Setup.
2Press 4, then press 7.
This selects Advanced Fax Setup, then selects Error Correction Mode.
3Press 
to switch between Off and On.
4Press Enter to use the selected setting.
42 | use the fax features |