HP 2200 manual Set the paper type

		hp psc 2200 series
paper	tips
Continuous (banner)	Continuous banner paper is also known as computer or z-fold paper.
paper	•	Before loading banner paper, remove all other paper from the paper
(works only with		tray, then remove the output tray.
printing)		Remove the output
		tray.
		Insert the unattached
		edge of the paper into
		the paper tray.
	•	If you use non-HP banner paper, use 20-lb. paper and fan the paper
		before loading it.
	•	Verify that the stack of banner paper contains at least five pages in
		the stack.
	•	Carefully tear off the perforated edge strips from both sides of the
		paper stack, if any, and unfold and refold the paper to make sure the
		pages do not stick together.
	•	Put the paper in the paper tray so that the unattached edge is at the
		top of the stack. Insert the first edge into the paper tray until it stops,
		as shown in the illustration above.
	•	Replace the output tray.

set the paper type

If you want to use a different type of paper, such as photo paper, transparency film, Iron-On T-shirt transfers, or brochures, simply load that paper in the paper tray. You must then change the paper type settings to ensure the best print quality.

HP recommends paper type settings according to the type of paper you’re using.

This setting refers to copy or photo card options only. If you want to set the paper type for printing from a computer, set the properties in the Print dialog box of the software.

1Press Copy or Photo Card, if not already lit.

2 Press Options until Paper Type appears.

3Press until the appropriate paper type appears.

4Press Enter to choose the displayed paper type.

set the paper type 13