ASRock IMB-A160-H manual CPU Configuration, Cool ‘n’ Quiet, SVM Mode

Page 38

3.3.1 CPU Configuration

Cool ‘n’ Quiet

Use this to enable or disable AMD’s Cool ‘n’ QuietTM technology. The default value is [Enabled]. Configuration options: [Enabled] and [Disabled]. If you have installed Windows® 8 / 7 / VistaTM and want to enable this function, please set to [Enabled]. Please note that enabling this function may reduce CPU voltage and memory frequency, and lead to system stability or compatibility issues with some memory modules or power supplies. Please set this item to [Disabled] if the issues mentioned above occurs.

SVM Mode

When this is set to [Enabled], a VMM (Virtual Machine Architecture) can utilize the additional hardware capabilities provided by AMD-V. The default value is [Enabled]. Configuration options: [Enabled] and [Disabled].

38

Image 38
Contents IMB-A160-H Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Rear Panel I/O ConnectorsBios Feature Support CDPage ASRock Instant Flash Unique FeaturesASRock Crashless Bios Motherboard Layout IMB-A160Lvds for IMB-A160 only I/O Panel LAN Port LED IndicationsInstallation Pre-installation PrecautionsInstalling Memory Modules Dimm Installing an Expansion Card Expansion Slots PCI Express SlotsInstalling Sata Hard Disks Power Connectors Reset Reset Switch Installing the System PanelPwrbtn Power Switch Pled System Power LEDOnboard Headers and Connectors Pin LPT1 See p.10, NoPIN CPU Fan Connector Inverter Power Control Header Optional Digital Input / Output Pin Header Jumpers Setup PWR-On Mode Jumper AT Mode Set Up Uefi Operating System SetupUsing Ahci Mode Using Ahci Mode Set Up Uefi Use RAID Installation Guide to set the RAID configuration Drivers Menu Installing DriversRunning The Support CD Utilities MenuHot Plug / Hot Swap Operation Guide What is Hot Plug and Hot Swap?Hot Plug and Hot Swap for Hard Disk Drives Points for attention, before you process Hot Plug / Hot Swap How to Hot Plug / Hot Swap a HDD StepHow to Hot Unplug / Hot Swap a HDD Introduction Uefi Menu BarNavigation Keys Main Screen Advanced Screen Cool ‘n’ Quiet CPU ConfigurationSVM Mode North Bridge Configuration Onboard HD Audio South Bridge ConfigurationRestore on AC/Power Loss Front PanelSata IDE Combined Mode Storage ConfigurationSata Mode Sata ControllerSuper IO Configuration Acpi Configuration USB Keyboard/Remote Power On USB Mouse Power OnLegacy USB Support USB ConfigurationUSB 2.0 Controller Trusted Computing TPM SupportCPU FAN1 Setting Hardware Health Event Monitoring ScreenBootup Num-Lock Boot ScreenSetup Prompt Timeout Boot From Onboard LANSecurity Screen Save Changes and Exit Load Uefi DefaultsExit Screen Discard Changes and Exit