ASRock IMB-A160-H manual How to Hot Unplug / Hot Swap a HDD

Page 33

How to Hot Unplug / Hot Swap a HDD:

Please follow the instructions below to process Hot Unplug / Hot Swap. Improper procedures will cause the HDD damage and data loss.

Step 1

Unplug the SATA data cable from the HDD’s side.

Step 2

Unplug the SATA 15-pin power cable connector (Black) from the HDD's side.

33

Image 33

Contents IMB-A160-H Disclaimer Copyright NoticeContents Uefi Setup Utility Introduction Package ContentsSpecifications Bios Feature ConnectorsRear Panel I/O Support CDPage Unique Features ASRock Crashless BiosASRock Instant Flash IMB-A160 Motherboard LayoutLvds for IMB-A160 only LAN Port LED Indications I/O PanelPre-installation Precautions InstallationInstalling Memory Modules Dimm Expansion Slots PCI Express Slots Installing an Expansion CardInstalling Sata Hard Disks Power Connectors Pwrbtn Power Switch Installing the System PanelReset Reset Switch Pled System Power LEDPin LPT1 See p.10, No Onboard Headers and ConnectorsPIN CPU Fan Connector Inverter Power Control Header Optional Digital Input / Output Pin Header Jumpers Setup PWR-On Mode Jumper AT Mode Operating System Setup Using Ahci ModeSet Up Uefi Using Ahci Mode Set Up Uefi Use RAID Installation Guide to set the RAID configuration Running The Support CD Installing DriversDrivers Menu Utilities MenuWhat is Hot Plug and Hot Swap? Hot Plug and Hot Swap for Hard Disk DrivesHot Plug / Hot Swap Operation Guide Points for attention, before you process Hot Plug / Hot Swap Step How to Hot Plug / Hot Swap a HDDHow to Hot Unplug / Hot Swap a HDD Uefi Menu Bar IntroductionNavigation Keys Main Screen Advanced Screen CPU Configuration SVM ModeCool ‘n’ Quiet North Bridge Configuration Restore on AC/Power Loss South Bridge ConfigurationOnboard HD Audio Front PanelSata Mode Storage ConfigurationSata IDE Combined Mode Sata ControllerSuper IO Configuration Acpi Configuration USB Mouse Power On USB Keyboard/Remote Power OnUSB Configuration USB 2.0 ControllerLegacy USB Support TPM Support Trusted ComputingHardware Health Event Monitoring Screen CPU FAN1 SettingSetup Prompt Timeout Boot ScreenBootup Num-Lock Boot From Onboard LANSecurity Screen Exit Screen Load Uefi DefaultsSave Changes and Exit Discard Changes and Exit