ASRock IMB-A160-H manual Specifications

Page 6

1.2 Specifications

Platform

- Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0

 

cm

 

- All Solid Capacitor design (100% Japan-made high

 

quality Conductive Polymer Capacitors)

CPU

- Supports AMD Embedded G-Series APU T56N/T48E/

 

T40E

 

- Supports AMD Virtualization Technology

Chipset

- AMD A50M/A55E Controller Hub

Memory

- Single Channel DDR3 memory technology

 

- 2 x 204-pin DDR3 SO-DIMM slots

 

- T56N supports DDR3 1333/1066 MHz SDRAM,

 

T48E/T40E supports DDR3 1066 MHz SDRAM

 

- Max. capacity of system memory: 8GB

 

(see CAUTION 1)

Expansion Slots

- 1 x PCI Express 2.0 x4 slot (PCIE1: x4 mode)

 

- 1 x Mini-PCI Express slot (Half size)

Graphics

- AMD Radeon HD 6320 with T56N, AMD Radeon HD

 

6250 with T48E/T40E

 

- Supports Pixel Shader 5.0, DirectX 11

 

- Max. shared memory 256MB

 

- Three VGA Output options: D-Sub, LVDS and HDMI

 

- Supports D-Sub with max. resolution up to 2560x

 

1600 @ 60Hz for T56N or 1920x1200 for T48E/T40E

 

- Supports 2-CH/24bits LVDS with max. resolution up

 

to 1920x1200 @ 60Hz (LVDS for IMB-A160 only.)

 

- Supports HDMI 1.3a Technology with max. resolution

 

up to 1920x1200 @ 60Hz (Optional)

Audio

- 2 CH Audio (Realtek ALC662 Audio Codec)

LAN

- 2 x Gigabit LAN 10/100/1000 Mb/s

 

- Realtek RTL8111E

 

- Supports Wake On LAN

 

- Supports LAN Cable Detection

 

- Supports Energy Efficient Ethernet 802.3az

 

- Supports Dual LAN

 

- Supports PXE

6

Image 6
Contents IMB-A160-H Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Rear Panel I/O ConnectorsBios Feature Support CDPage Unique Features ASRock Crashless BiosASRock Instant Flash Motherboard Layout IMB-A160Lvds for IMB-A160 only I/O Panel LAN Port LED IndicationsInstallation Pre-installation PrecautionsInstalling Memory Modules Dimm Installing an Expansion Card Expansion Slots PCI Express SlotsInstalling Sata Hard Disks Power Connectors Reset Reset Switch Installing the System PanelPwrbtn Power Switch Pled System Power LEDOnboard Headers and Connectors Pin LPT1 See p.10, NoPIN CPU Fan Connector Inverter Power Control Header Optional Digital Input / Output Pin Header Jumpers Setup PWR-On Mode Jumper AT Mode Operating System Setup Using Ahci ModeSet Up Uefi Using Ahci Mode Set Up Uefi Use RAID Installation Guide to set the RAID configuration Drivers Menu Installing DriversRunning The Support CD Utilities MenuWhat is Hot Plug and Hot Swap? Hot Plug and Hot Swap for Hard Disk DrivesHot Plug / Hot Swap Operation Guide Points for attention, before you process Hot Plug / Hot Swap How to Hot Plug / Hot Swap a HDD StepHow to Hot Unplug / Hot Swap a HDD Introduction Uefi Menu BarNavigation Keys Main Screen Advanced Screen CPU Configuration SVM ModeCool ‘n’ Quiet North Bridge Configuration Onboard HD Audio South Bridge ConfigurationRestore on AC/Power Loss Front PanelSata IDE Combined Mode Storage ConfigurationSata Mode Sata ControllerSuper IO Configuration Acpi Configuration USB Keyboard/Remote Power On USB Mouse Power OnUSB Configuration USB 2.0 ControllerLegacy USB Support Trusted Computing TPM SupportCPU FAN1 Setting Hardware Health Event Monitoring ScreenBootup Num-Lock Boot ScreenSetup Prompt Timeout Boot From Onboard LANSecurity Screen Save Changes and Exit Load Uefi DefaultsExit Screen Discard Changes and Exit