ASRock IMB-A160-H manual Rear Panel I/O, Connectors, Bios Feature, Support CD, Hardware, Monitor

Page 7

 

 

Rear Panel I/O

- 1 x PS/2 Mouse/Keyboard Port

 

- 1 x D-Sub Port

 

- 2 x HDMI Ports (IMB-A160 has 1 port)

 

- 2 x Serial Ports (RS-232/422/485)

 

- 6 x Ready-to-Use USB 2.0 Ports

 

- 2 x RJ-45 LAN Ports with LED (ACT/LINK LED and

 

SPEED LED)

 

- HD Audio Jacks: Line Out / MIC In

SATA3

- 4 x SATA3 6.0 Gb/s connectors, support RAID (RAID

 

0, RAID 1, RAID 5 and RAID 10), NCQ, AHCI and

 

Hot Plug (Raid is not supported by AMD A50M)

Connectors

- 4 x SATA3 6.0 Gb/s connectors

 

- 4 x COM port headers

 

- 1 x LVDS header (Optional)

 

- 1 x Printer port

 

- 1 x Mini SATA slot

 

- 1 x TPM header

 

- 1 x CPU Fan connector (1 x 4-pin)

 

- 1 x Chassis Fan connector (1 x 3-pin)

 

- 4 pin 12V power connector

 

- SATA power connector

 

- Front panel audio connector

 

- 3 x USB 2.0 headers (support 6 USB 2.0 ports)

 

- 1 x Vertical Type A USB

BIOS Feature

- 32Mb AMI UEFI Legal BIOS with GUI support

 

- Supports “Plug and Play”

 

- ACPI 1.1 Compliance Wake Up Events

 

- Supports jumperfree

 

- SMBIOS 2.3.1 Support

Support CD

- Drivers

Hardware

- CPU/Chassis Temperature Sensing

Monitor

- CPU/Chassis/Power Fan Tachometer

 

- CPU/Chassis Quiet Fan

 

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS

- Microsoft® Windows® 8 / 8 64-bit / 7 / 7 64-bit / VistaTM

 

/ VistaTM 64-bit / XP / XP 64-bit compliant

Certifications

- FCC, CE, WHQL

7

Image 7
Contents IMB-A160-H Disclaimer Copyright NoticeContents Uefi Setup Utility Introduction Package ContentsSpecifications Support CD ConnectorsBios Feature Rear Panel I/OPage ASRock Crashless Bios Unique FeaturesASRock Instant Flash IMB-A160 Motherboard LayoutLvds for IMB-A160 only LAN Port LED Indications I/O PanelPre-installation Precautions InstallationInstalling Memory Modules Dimm Expansion Slots PCI Express Slots Installing an Expansion CardInstalling Sata Hard Disks Power Connectors Pled System Power LED Installing the System PanelPwrbtn Power Switch Reset Reset SwitchPin LPT1 See p.10, No Onboard Headers and ConnectorsPIN CPU Fan Connector Inverter Power Control Header Optional Digital Input / Output Pin Header Jumpers Setup PWR-On Mode Jumper AT Mode Using Ahci Mode Operating System SetupSet Up Uefi Using Ahci Mode Set Up Uefi Use RAID Installation Guide to set the RAID configuration Utilities Menu Installing DriversRunning The Support CD Drivers MenuHot Plug and Hot Swap for Hard Disk Drives What is Hot Plug and Hot Swap?Hot Plug / Hot Swap Operation Guide Points for attention, before you process Hot Plug / Hot Swap Step How to Hot Plug / Hot Swap a HDDHow to Hot Unplug / Hot Swap a HDD Uefi Menu Bar IntroductionNavigation Keys Main Screen Advanced Screen SVM Mode CPU ConfigurationCool ‘n’ Quiet North Bridge Configuration Front Panel South Bridge ConfigurationRestore on AC/Power Loss Onboard HD AudioSata Controller Storage ConfigurationSata Mode Sata IDE Combined ModeSuper IO Configuration Acpi Configuration USB Mouse Power On USB Keyboard/Remote Power OnUSB 2.0 Controller USB ConfigurationLegacy USB Support TPM Support Trusted ComputingHardware Health Event Monitoring Screen CPU FAN1 SettingBoot From Onboard LAN Boot ScreenSetup Prompt Timeout Bootup Num-LockSecurity Screen Discard Changes and Exit Load Uefi DefaultsExit Screen Save Changes and Exit