Teka TB 600, TT 620, VT CM, VT DUAL., 1 VTC B, TR 640, TR 735 AB GB Installation, Positioning the hobs

Page 14

GB Installation

Important

INSTALLATION AND SETUP SHOULD BE CARRIED OUT BY AN AUTHORISED TECHNICIAN IN LINE WITH CURRENT INSTALLATION STANDARDS.

Positioning the hobs

Depending on the model to be installed, an opening with the dimensions shown in fi- gure 2 will be cut into the unit’s worktop.

The system for fixing the hob is intended for use with kitchen units with a thickness of 20, 30 and 40 mm. In the packaging of the models VTN DC and TC 620, there is a template included that is for use in sizing the space for these glass ceramic hob mo- dels.

See the fiting hole’s dimensions for each model on the “dimensions and characteris- tics” table of this manual. The minimum distance between the surface supporting the cooking pans and the lower part of the kitchen unit or the hood located above the hob should be 650 mm. If the hood’s ins- tallation instructions recommend that the gap is greater than this, you should follow this advice.

The hobs described in this manual can only be installed with Teka ovens. Models with no control knobs are only to be insta- lled with Teka ovens and/or Teka control panels.

The unit where the hob and oven will be lo- cated will be suitably fixed.

INSTALLATION WITH A CUTLERY DRA- WER OR LOW CUPBOARD (TOUCH CONTROL MODELS)

If you wish to have a cupboard or cutlery drawer beneath the hob, you should install

Minimum distances to walls

Minimum ventilation distances

minimun 40 mm

OVEN

minimun 40 mm

minimun 40 mm

OVEN

fig. 1

a panel to separate them. This will prevent accidental contact with the hot surface of the body of the appliance.

The board should be installed 20 mm below the bottom of the hob and an empty

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Ceramic Hobs Contents / Inhalt / Table des Matières / Spis treœci Informations Techniques InstallationPrésentation Utilisation ET EntretienModèle VTN DC Model VTN DCModell VTN DC GB Model VT CMFR Modèle VT DUAL.1 GB Model VT DUAL.1DE Modell VT DUAL.1 Model VT CM Inox HalogenModèle VTC DC Model VTC DCModell VTC DC Model VTC BModèle VR Model VRModell VR Model TTModèle VT TC Model VT TC Model TRModell VT TC Modell TRFR Modèle TT GB Model TTDE Modelle TT GB Models TR 640 and TTModèle TT 600, TR 600 et TB Model TT 600, TR 600 and TB Model TCModell TT 600, TR 600 und TB Modelle TCModèle TR 735 AB Model TR 735 AB Model TMModell TR 735 AB Modell TM Modèle TMModèle TM Modèle TR Model TM Model TRModell TM Modell TR Guide to Using the Instructions Booklet Safety instructionsGB Installation Positioning the hobsFixing the hob See figs ModelsPositioning the oven Connecting the electricityCeramic hobs with controls Joining the hob to the oven Or the control panelRear view of the Control Panel Connecting the gasModel VT DUAL.1 Gas conversion Unit Hob dimensionsConfiguration ElectricsGas Technical details Characteristics Common to ALL ModelsCharacteristics of the VT DUAL.1 Special requirements Before first use Touch control user InstructionsModels TR 640, TT 640, TR 620, TT 620 and TM Switching the Appliance onSelecting the Hotplate to be Switched on Switching the Appliance OFF Switching the Hotplate OFFResidual Heat Indicator Connecting / Turning on the Double and Triple HotplateModels TT 630, TC 620 and TR Disconnecting / Turning OFF the Double HotplateLocking the Hobs Sensors Unlocking for cooking only models shown in figureSwitching HEAT-UP Function on Safety disconnectionCancelling the locking function Heat-up function Automatic cooking startSwitching HEAT-UP Function OFF Timer FunctionModifying the Power Level DU- Ring HEAT-UP Function Switching on the clockViewing / Changing the programmed time Disconnecting the clockQuick switch-off Models TC 620, TR 735 AB and TRChanging the programmed time Clock as a Countdown timerSwitching on the counter Models TT 640 and TRPower surges Switching off the counterCeramic hobs with controls Instructions Double Circuit InstructionsIgniting the burners Residual Heat IndicatorsAnti-accidental turn system On gas controls Suggestions for using the burners effectively Mantaining the VT DUAL.1 Advice on using the hotplates effectivelyCleaning and care the burners Recommended Cleaning Products Cleaning and careCleaning and Care the Glass Light soilingWhen the glass’ colour changes Cleaning and Care the FramePan is sticking to the glass Message ER 25 and the beeping signalNeither the hotplates nor the pilot lights are working Message ER 21 on the control and subsequent disconnectionGas burners are not lighting Gas burners are making the pans dirtyTeka Group Teka Industrial, S.A Teka Küchentechnik GmbH
Related manuals
Manual 38 pages 12.62 Kb

TT 640, TT 620, VT CM, VT DUAL., TT 600 specifications

Teka is a renowned brand in the kitchen appliance industry, known for its innovative and high-quality products. Among its diverse offerings, several models stand out for their advanced features and user-friendly characteristics: the VTN DC, TB 600, TR 620, VR 622, and TT 620. Each of these models is designed to enhance the cooking experience, making it more efficient and enjoyable.

The Teka VTN DC is a versatile kitchen appliance that combines multiple functions, allowing users to steam, grill, and bake all in one device. Its intelligent control panel simplifies the selection of cooking modes, while the efficient heating system ensures that food is cooked evenly. The VTN DC is also designed with energy efficiency in mind, providing significant savings on utility bills while maintaining excellent cooking performance.

Next is the Teka TB 600, an appliance known for its sleek design and exceptional baking capabilities. This oven features advanced convection technology, which distributes heat evenly throughout the cooking chamber, ensuring that every dish is cooked to perfection. Additionally, the TB 600 comes with a range of preset cooking programs, making it easy for users to choose the optimal settings for various types of meals. Its intuitive touchscreen interface adds to the user-friendly experience.

The Teka TR 620 is a powerful and stylish range that includes gas hobs and an electric oven, catering to the needs of diverse cooking styles. It features precise temperature control and multiple burner options, allowing for simultaneous cooking of multiple dishes. The TR 620 is also built with safety features, including flame failure devices, providing peace of mind for users during meal preparation.

For those who prioritize versatility, the Teka VR 622 is a standout product. This model offers a combination of a microwave and a convection oven, giving users the flexibility to cook quickly or with precision. With its multiple cooking modes and easy-to-clean interior, the VR 622 caters to busy lifestyles while maintaining high culinary standards.

Lastly, the Teka TT 620 is an induction cooktop that embodies modern cooking technology. It heats pots and pans directly, resulting in rapid cooking times and energy efficiency. The TT 620 comes with multiple cooking zones and power levels, enabling precise adjustments for different recipes. Its safety features, such as child lock and automatic shutdown, make it a secure choice for families.

In summary, Teka’s VTN DC, TB 600, TR 620, VR 622, and TT 620 models are designed with modern technologies and user-friendly characteristics, making them excellent choices for any kitchen. Their innovative features ensure a delightful cooking experience while adhering to contemporary efficiency standards.
Top Page Image Contents